Daily Papers

Understanding the loss landscape is an important problem in machine learning. One key feature of the loss function, common to many neural network architectures, is the presence of exponentially many low lying local minima. Physical systems with similar energy landscapes may provide useful insights. In this work, we point out that black holes naturally give rise to such landscapes, owing to the existence of black hole entropy. For definiteness, we consider 1/8 BPS black holes in N = 8 string theory. These provide an infinite family of potential landscapes arising in the microscopic descriptions of corresponding black holes. The counting of minima amounts to black hole microstate counting. Moreover, the exact numbers of the minima for these landscapes are a priori known from dualities in string theory. Some of the minima are connected by paths of low loss values, resembling mode connectivity. We estimate the number of runs needed to find all the solutions. Initial explorations suggest that Stochastic Gradient Descent can find a significant fraction of the minima.

High-dimensional count data are common in scientific applications, but most diffusion and flow models are designed for continuous or categorical data, and generation often requires many sequential model evaluations. We propose Count Flow Map, a generative model that learns finite-time transitions directly in count space for one- or few-step generation. Our model directly learns stochastic transitions over finite time intervals, using Poisson births and Binomial deaths to preserve nonnegative integer counts without a predefined maximum. These transition models are trained to match the underlying local birth--death dynamics and to maintain consistency across step sizes. We characterize the connection between local dynamics and finite-time transition consistency and derive a bound on the generation error. After validating Count Flow Map in several simulations, including a high-dimensional, high-count setting, we apply it to single-cell drug perturbation prediction and neural population forecasting, where it captures perturbation responses and supports forecasts of high-activity events with only one or a few model evaluations. Together, these experiments demonstrate that Count Flow Map enables high-quality generation directly in count space across inference budgets, from one-step to few-step generation, using a single trained model.

Few-shot detection-based counters estimate the number of instances in the image specified only by a few test-time exemplars. A common approach to localize objects across multiple sizes is to merge backbone features of different resolutions. Furthermore, to enable small object detection in densely populated regions, the input image is commonly upsampled and tiling is applied to cope with the increased computational and memory requirements. Because of these ad-hoc solutions, existing counters struggle with images containing diverse-sized objects and densely populated regions of small objects. We propose GECO2, an end-to-end few-shot counting and detection method that explicitly addresses the object scale issues. A new dense query representation gradually aggregates exemplar-specific feature information across scales that leads to high-resolution dense queries that enable detection of large as well as small objects. GECO2 surpasses state-of-the-art few-shot counters in counting as well as detection accuracy by 10% while running 3x times faster at smaller GPU memory footprint.

Video understanding requires models to continuously track and update world state during playback. Although existing benchmarks have advanced video understanding evaluation across multiple dimensions, they provide limited visibility into how models maintain world state over time. We propose SVCBench, a Streaming Video Counting Benchmark that repositions counting as a minimal, controlled probe for diagnosing models' world-state maintenance capability. We decompose this capability into object counting and event counting, forming 8 fine-grained subcategories. Object counting covers tracking currently visible objects and cumulative unique identities, while event counting covers detecting instantaneous actions and tracking complete activity cycles. SVCBench contains 406 videos with frame-by-frame annotations of 10,071 event occurrences and object state changes, yielding 1,000 streaming QA pairs with 4,576 query points distributed along video timelines. By observing state maintenance trajectories through streaming multi-point queries, we design three complementary metrics to diagnose numerical precision, trajectory consistency, and temporal awareness. Evaluations of mainstream video-language models show that current models still exhibit significant deficiencies in spatial-temporal state maintenance, with especially poor performance on periodic event counting. SVCBench provides a diagnostic framework for measuring and improving state maintenance in video understanding systems. Our code and data are available at https://buaa-colalab.github.io/SVCBench.

We investigate the time evolution of the Boltzmann entropy of a dilute gas of N particles, N>>1, as it undergoes a free expansion doubling its volume. The microstate of the system, a point in the 4N dimensional phase space, changes in time via Hamiltonian dynamics. Its entropy, at any time t, is given by the logarithm of the phase space volume of all the microstates giving rise to its macrostate at time t. The macrostates that we consider are defined by coarse graining the one-particle phase space into cells Δ_α. The initial and final macrostates of the system are equilibrium states in volumes V and 2V, with the same energy E and particle number N. Their entropy per particle is given, for sufficiently large systems, by the thermodynamic entropy as a function of the particle and energy density, whose leading term is independent of the size of the Δ_α. The intermediate (non-equilibrium) entropy does however depend on the size of the cells Δ_α. Its change with time is due to (i) dispersal in physical space from free motion and to (ii) the collisions between particles which change their velocities. The former depends strongly on the size of the velocity coarse graining Δv: it produces entropy at a rate proportional to Δv. This dependence is investigated numerically and analytically for a dilute two-dimensional gas of hard discs. It becomes significant when the mean free path between collisions is of the same order or larger than the length scale of the initial spatial inhomogeneity. In the opposite limit, the rate of entropy production is essentially independent of Δv and is given by the Boltzmann equation for the limit Δvrightarrow 0. We show that when both processes are active the time dependence of the entropy has a scaling form involving the ratio of the rates of its production by the two processes.

We propose a new method for count-based exploration in high-dimensional state spaces. Unlike previous work which relies on density models, we show that counts can be derived by averaging samples from the Rademacher distribution (or coin flips). This insight is used to set up a simple supervised learning objective which, when optimized, yields a state's visitation count. We show that our method is significantly more effective at deducing ground-truth visitation counts than previous work; when used as an exploration bonus for a model-free reinforcement learning algorithm, it outperforms existing approaches on most of 9 challenging exploration tasks, including the Atari game Montezuma's Revenge.

Accurate counts of fish populations are essential for monitoring ecosystems and making decisions for conservation, harvest limits, and river management. In many field deployments, these counts are obtained from sonar videos that experts must inspect manually, making large-scale monitoring slow, expensive, and difficult. Automated counting systems have been proposed as a scalable alternative, but so far this promise has been difficult to realize in deployment. Developing evaluations that better reflect real-world deployment conditions will help close this gap and drive improvements in counting performance in practice. To achieve this, we propose Caltech Fish Counting 2026 (CFC26), a new dataset with improved evaluation protocols that simulate deployment to seen and novel rivers, testing in-distribution and out-of-distribution performance. We expand the CFC22 dataset to eleven deployment locations across nine Pacific salmon river systems from Alaska to Northern California, capturing a broader geographical and ecological range of data. We additionally introduce two new evaluation metrics for counting, nMNE and nMANE, that mirror the operational workflow that experts use and help surface errors that frame-level detection metrics do not capture. Using these metrics, we reveal previously-concealed directional bias in upstream vs downstream counts, which would have direct and significant ecological implications if undetected. The dataset and code are publicly available on CaltechDATA and GitHub.

We propose a novel framework for interactive class-agnostic object counting, where a human user can interactively provide feedback to improve the accuracy of a counter. Our framework consists of two main components: a user-friendly visualizer to gather feedback and an efficient mechanism to incorporate it. In each iteration, we produce a density map to show the current prediction result, and we segment it into non-overlapping regions with an easily verifiable number of objects. The user can provide feedback by selecting a region with obvious counting errors and specifying the range for the estimated number of objects within it. To improve the counting result, we develop a novel adaptation loss to force the visual counter to output the predicted count within the user-specified range. For effective and efficient adaptation, we propose a refinement module that can be used with any density-based visual counter, and only the parameters in the refinement module will be updated during adaptation. Our experiments on two challenging class-agnostic object counting benchmarks, FSCD-LVIS and FSC-147, show that our method can reduce the mean absolute error of multiple state-of-the-art visual counters by roughly 30% to 40% with minimal user input. Our project can be found at https://yifehuang97.github.io/ICACountProjectPage/.

Class-agnostic counting methods enumerate objects of an arbitrary class, providing tremendous utility in many fields. Prior works have limited usefulness as they require either a set of examples of the type to be counted or that the query image contains only a single type of object. A significant factor in these shortcomings is the lack of a dataset to properly address counting in settings with more than one kind of object present. To address these issues, we propose the first Multi-class, Class-Agnostic Counting dataset (MCAC) and A Blind Counter (ABC123), a method that can count multiple types of objects simultaneously without using examples of type during training or inference. ABC123 introduces a new paradigm where instead of requiring exemplars to guide the enumeration, examples are found after the counting stage to help a user understand the generated outputs. We show that ABC123 outperforms contemporary methods on MCAC without needing human in-the-loop annotations. We also show that this performance transfers to FSC-147, the standard class-agnostic counting dataset. MCAC is available at MCAC.active.vision and ABC123 is available at ABC123.active.vision.

Diffusion probabilistic models (DPMs) have demonstrated remarkable progress in generative tasks, such as image and video synthesis. However, they still often produce hallucinated samples (hallucinations) that conflict with real-world knowledge, such as generating an implausible duplicate cup floating beside another cup. Despite their prevalence, the lack of feasible methodologies for systematically quantifying such hallucinations hinders progress in addressing this challenge and obscures potential pathways for designing next-generation generative models under factual constraints. In this work, we bridge this gap by focusing on a specific form of hallucination, which we term counting hallucination, referring to the generation of an incorrect number of instances or structured objects, such as a hand image with six fingers, despite such patterns being absent from the training data. To this end, we construct a dataset suite CountHalluSet, with well-defined counting criteria, comprising ToyShape, SimObject, and RealHand. Using these datasets, we develop a standardized evaluation protocol for quantifying counting hallucinations, and systematically examine how different sampling conditions in DPMs, including solver type, ODE solver order, sampling steps, and initial noise, affect counting hallucination levels. Furthermore, we analyze their correlation with common evaluation metrics such as FID, revealing that this widely used image quality metric fails to capture counting hallucinations consistently. This work aims to take the first step toward systematically quantifying hallucinations in diffusion models and offer new insights into the investigation of hallucination phenomena in image generation.

We propose the use of dilated filters to construct an aggregation module in a multicolumn convolutional neural network for perspective-free counting. Counting is a common problem in computer vision (e.g. traffic on the street or pedestrians in a crowd). Modern approaches to the counting problem involve the production of a density map via regression whose integral is equal to the number of objects in the image. However, objects in the image can occur at different scales (e.g. due to perspective effects) which can make it difficult for a learning agent to learn the proper density map. While the use of multiple columns to extract multiscale information from images has been shown before, our approach aggregates the multiscale information gathered by the multicolumn convolutional neural network to improve performance. Our experiments show that our proposed network outperforms the state-of-the-art on many benchmark datasets, and also that using our aggregation module in combination with a higher number of columns is beneficial for multiscale counting.

Class-agnostic object counting aims to count all objects in an image with respect to example boxes or class names, a.k.a few-shot and zero-shot counting. In this paper, we propose a generalized framework for both few-shot and zero-shot object counting based on detection. Our framework combines the superior advantages of two foundation models without compromising their zero-shot capability: (i) SAM to segment all possible objects as mask proposals, and (ii) CLIP to classify proposals to obtain accurate object counts. However, this strategy meets the obstacles of efficiency overhead and the small crowded objects that cannot be localized and distinguished. To address these issues, our framework, termed PseCo, follows three steps: point, segment, and count. Specifically, we first propose a class-agnostic object localization to provide accurate but least point prompts for SAM, which consequently not only reduces computation costs but also avoids missing small objects. Furthermore, we propose a generalized object classification that leverages CLIP image/text embeddings as the classifier, following a hierarchical knowledge distillation to obtain discriminative classifications among hierarchical mask proposals. Extensive experimental results on FSC-147, COCO, and LVIS demonstrate that PseCo achieves state-of-the-art performance in both few-shot/zero-shot object counting/detection. Code: https://github.com/Hzzone/PseCo

Object counting is a foundational vision task with over a decade of dedicated research, yet state-of-the-art models still fail systematically in the mixed-object setting that dominates real-world applications such as industrial inspection and product sorting. We show that this gap is strongly driven by limitations in existing training and evaluation data: real counting datasets are prohibitively expensive to annotate and suffer from labeling noise, while existing synthetic alternatives lack diversity and realism. We address this with MixCount, a dataset and benchmark for mixed-object counting designed to target the failure modes of current counting models. To overcome the high cost of constructing and labeling such data, we develop an automatic generation pipeline that synthesizes images, fine-grained textual descriptions, and pixel-perfect counting annotations at scale, eliminating the labeling ambiguity that plagues prior datasets. Evaluating state-of-the-art counting models on MixCount exposes severe degradation in the mixed-object setting. More importantly, training these models on our synthesized data yields substantial gains on real-world benchmarks, reducing MAE by 20.14% on FSC-147 and by 18.3% on PairTally. These results establish MixCount as both a benchmark and a training dataset for fine-grained counting, and demonstrate that our pipeline, which produces effectively unlimited labeled data, helps address a long-standing bottleneck in counting models.

Class-agnostic counting (CAC) aims to estimate the number of objects in images without being restricted to predefined categories. However, while current exemplar-based CAC methods offer flexibility at inference time, they still rely heavily on labeled data for training, which limits scalability and generalization to many downstream use cases. In this paper, we introduce CountingDINO, the first training-free exemplar-based CAC framework that exploits a fully unsupervised feature extractor. Specifically, our approach employs self-supervised vision-only backbones to extract object-aware features, and it eliminates the need for annotated data throughout the entire proposed pipeline. At inference time, we extract latent object prototypes via ROI-Align from DINO features and use them as convolutional kernels to generate similarity maps. These are then transformed into density maps through a simple yet effective normalization scheme. We evaluate our approach on the FSC-147 benchmark, where we consistently outperform a baseline based on an SOTA unsupervised object detector under the same label- and training-free setting. Additionally, we achieve competitive results -- and in some cases surpass -- training-free methods that rely on supervised backbones, non-training-free unsupervised methods, as well as several fully supervised SOTA approaches. This demonstrates that label- and training-free CAC can be both scalable and effective. Code: https://lorebianchi98.github.io/CountingDINO/.

Existing works on visual counting primarily focus on one specific category at a time, such as people, animals, and cells. In this paper, we are interested in counting everything, that is to count objects from any category given only a few annotated instances from that category. To this end, we pose counting as a few-shot regression task. To tackle this task, we present a novel method that takes a query image together with a few exemplar objects from the query image and predicts a density map for the presence of all objects of interest in the query image. We also present a novel adaptation strategy to adapt our network to any novel visual category at test time, using only a few exemplar objects from the novel category. We also introduce a dataset of 147 object categories containing over 6000 images that are suitable for the few-shot counting task. The images are annotated with two types of annotation, dots and bounding boxes, and they can be used for developing few-shot counting models. Experiments on this dataset shows that our method outperforms several state-of-the-art object detectors and few-shot counting approaches. Our code and dataset can be found at https://github.com/cvlab-stonybrook/LearningToCountEverything.

Object counting remains fragmented across domain-specific datasets and task formulations, despite rapid progress in generalist vision models. Existing counting models are often tailored to scenarios such as crowds, vehicles, cells, crops, or remote-sensing objects, and thus struggle to generalize across categories, visual domains, object scales, and density distributions. In this paper, we study text-guided object counting across domains, where a model takes an image and a natural-language query as input and returns an instance-grounded set of target points whose cardinality gives the count. This formulation unifies category-conditioned counting with interpretable spatial localization. To support this setting, we construct CLOC, a Cross-domain Large-scale Object Counting dataset that reorganizes diverse public data sources into a unified benchmark. CLOC covers six visual domains: General Scene, Remote Sensing, Histopathology, Cellular Microscopy, Agriculture, and Microbiology, with about 220K images, 619 categories, and 15M object instances. Based on CLOC, we propose Count Anything, a generalist model for text-guided object counting. Unlike density-map-based methods, which dominate counting models, Count Anything adopts discrete instance points and performs dual-granularity instance enumeration. A Region-level Sparse Counter provides object-level anchors for large and sparse targets, while a Pixel-level Dense Counter handles small, crowded, and weakly bounded targets via dense point prediction. A point-centric supervision strategy enables learning from heterogeneous annotations, and Complementary Count Fusion combines both counters in a parameter-free manner. Extensive experiments show that Count Anything achieves strong accuracy and multi-domain generalization, outperforming existing open-world counting methods. Code is available at: https://github.com/Mengqi-Lei/count-anything.

Real-world video benchmarks provide broad coverage, but their fixed clips entangle event count, rate, duration, and visual complexity, making failure modes hard to isolate. While existing programmatic benchmarks offer better control, they score only the final answer rather than auditing reported events against executable ground truth. To bridge this gap, we introduce trace-grounded parametric profiling for event counting in three controlled video tasks: bouncing-ball wall contacts, visual blinks, and categorical state transitions. Across 2,190 videos, we vary event count N and frequency F while holding rendering fixed. Each video includes an executable event trace for capability-surface estimation and timestamp-level evaluation. Our results reveal a staged temporal failure. At an 80% reliability threshold, Gemini 3.6 Flash reliably counts persistent state transitions up to 12 events at 0.5 and 1.0 Hz, yet demonstrates no reliable positive-count region for transient blinking events. Thus, event representation dictates whether a model initially accesses evidence -- a limitation that compounds as count and frequency increase. In the high-count, high-frequency regime, only 0.2% of final counts are correct and the model recovers just 18.1% of true events. To test if visual access is the primary bottleneck, we increase sampling rate. Although this boosts Bounce Ball accuracy from 19.6% to 29.3%, the reported sequence agrees with ground truth only 3.7% of the time. Extra frames can therefore inflate final scores without producing faithful event recovery. Different prompting strategies yield similarly limited gains, and real-world video evaluations show the same concentration of success at low event counts. Ultimately, trace-grounded profiling shifts video evaluation from aggregate accuracy metrics to a detailed diagnostic of where temporal reasoning fails.

We address a persistent challenge in text-to-image models: accurately generating a specified number of objects. Current models, which learn from image-text pairs, inherently struggle with counting, as training data cannot depict every possible number of objects for any given object. To solve this, we propose optimizing the generated image based on a counting loss derived from a counting model that aggregates an object\'s potential. Employing an out-of-the-box counting model is challenging for two reasons: first, the model requires a scaling hyperparameter for the potential aggregation that varies depending on the viewpoint of the objects, and second, classifier guidance techniques require modified models that operate on noisy intermediate diffusion steps. To address these challenges, we propose an iterated online training mode that improves the accuracy of inferred images while altering the text conditioning embedding and dynamically adjusting hyperparameters. Our method offers three key advantages: (i) it can consider non-derivable counting techniques based on detection models, (ii) it is a zero-shot plug-and-play solution facilitating rapid changes to the counting techniques and image generation methods, and (iii) the optimized counting token can be reused to generate accurate images without additional optimization. We evaluate the generation of various objects and show significant improvements in accuracy. The project page is available at https://ozzafar.github.io/count_token.

This paper exposes the ergodic ceiling and thermodynamic inefficiency of current deep learning, which converges to a statistical average of historic human knowledge. True semantic novelty requires a path-dependent, spatiotemporally bounded observer (a Data LifeCone) to inject non-ergodic insight, achieving KL divergence and avoiding manifold lock-in. AI Safety must recognise that a mature Artificial Superintelligence (ASI) would regard human-AI symbiosis as a thermodynamic necessity to avoid model collapse. We therefore propose hard physical containment via a digital physics sandbox powered by a Holographic E8 Projection Engine to verify models against real-world constraints. Spacetime is modeled as an information substrate of nested face-centered cubic (FCC) lattices of oscillating Planck-scale spheres maximizing local information and entropy density. Cut-and-project methods from the E8 root lattice produce a quasi-crystalline geometry where tetrahedral voids support SU chiral structure and elastic-shear eigenvalues generate candidate mass spectra. Rest mass is treated as discrete, integer microstate counts on local holographic boundaries (Bekenstein bound), replacing floating-point approximations with strict integer arithmetic to provide an information-theoretic definition of matter. Stable particles emerge as recurring lattice dislocations, and continuum recovery proceeds via variational renormalisation-group flows and Fourier Neural Operators that learn continuous spectral operators to recover the Schrödinger equation as an emergent statistical description. Crucially, these top-down topological constraints offer a mechanism for "NP-to-P" complexity collapse: by restricting an algorithm's proposal space to physically conserved causal trajectories, the sandbox prunes the combinatorial tree to deterministic, polynomial-time paths.

Recent advances in video generation have opened new avenues for macroscopic simulation of complex dynamic systems, but their application to microscopic phenomena remains largely unexplored. Microscale simulation holds great promise for biomedical applications such as drug discovery, organ-on-chip systems, and disease mechanism studies, while also showing potential in education and interactive visualization. In this work, we introduce MicroWorldBench, a multi-level rubric-based benchmark for microscale simulation tasks. MicroWorldBench enables systematic, rubric-based evaluation through 459 unique expert-annotated criteria spanning multiple microscale simulation task (e.g., organ-level processes, cellular dynamics, and subcellular molecular interactions) and evaluation dimensions (e.g., scientific fidelity, visual quality, instruction following). MicroWorldBench reveals that current SOTA video generation models fail in microscale simulation, showing violations of physical laws, temporal inconsistency, and misalignment with expert criteria. To address these limitations, we construct MicroSim-10K, a high-quality, expert-verified simulation dataset. Leveraging this dataset, we train MicroVerse, a video generation model tailored for microscale simulation. MicroVerse can accurately reproduce complex microscale mechanism. Our work first introduce the concept of Micro-World Simulation and present a proof of concept, paving the way for applications in biology, education, and scientific visualization. Our work demonstrates the potential of educational microscale simulations of biological mechanisms. Our data and code are publicly available at https://github.com/FreedomIntelligence/MicroVerse

Low-shot object counters estimate the number of objects in an image using few or no annotated exemplars. Objects are localized by matching them to prototypes, which are constructed by unsupervised image-wide object appearance aggregation. Due to potentially diverse object appearances, the existing approaches often lead to overgeneralization and false positive detections. Furthermore, the best-performing methods train object localization by a surrogate loss, that predicts a unit Gaussian at each object center. This loss is sensitive to annotation error, hyperparameters and does not directly optimize the detection task, leading to suboptimal counts. We introduce GeCo, a novel low-shot counter that achieves accurate object detection, segmentation, and count estimation in a unified architecture. GeCo robustly generalizes the prototypes across objects appearances through a novel dense object query formulation. In addition, a novel counting loss is proposed, that directly optimizes the detection task and avoids the issues of the standard surrogate loss. GeCo surpasses the leading few-shot detection-based counters by sim25\% in the total count MAE, achieves superior detection accuracy and sets a new solid state-of-the-art result across all low-shot counting setups.

Accurate plant counting provides valuable information for agriculture such as crop yield prediction, plant density assessment, and phenotype quantification. Vision-based approaches are currently the mainstream solution. Prior art typically uses a detection or a regression model to count a specific plant. However, plants have biodiversity, and new cultivars are increasingly bred each year. It is almost impossible to exhaust and build all species-dependent counting models. Inspired by class-agnostic counting (CAC) in computer vision, we argue that it is time to rethink the problem formulation of plant counting, from what plants to count to how to count plants. In contrast to most daily objects with spatial and temporal invariance, plants are dynamic, changing with time and space. Their non-rigid structure often leads to worse performance than counting rigid instances like heads and cars such that current CAC and open-world detection models are suboptimal to count plants. In this work, we inherit the vein of the TasselNet plant counting model and introduce a new extension, TasselNetV4, shifting from species-specific counting to cross-species counting. TasselNetV4 marries the local counting idea of TasselNet with the extract-and-match paradigm in CAC. It builds upon a plain vision transformer and incorporates novel multi-branch box-aware local counters used to enhance cross-scale robustness. Two challenging datasets, PAC-105 and PAC-Somalia, are harvested. Extensive experiments against state-of-the-art CAC models show that TasselNetV4 achieves not only superior counting performance but also high efficiency.Our results indicate that TasselNetV4 emerges to be a vision foundation model for cross-scene, cross-scale, and cross-species plant counting.

Systematic under-counting effects are observed in data collected across many disciplines, e.g., epidemiology and ecology. Under-counted tensor completion (UC-TC) is well-motivated for many data analytics tasks, e.g., inferring the case numbers of infectious diseases at unobserved locations from under-counted case numbers in neighboring regions. However, existing methods for similar problems often lack supports in theory, making it hard to understand the underlying principles and conditions beyond empirical successes. In this work, a low-rank Poisson tensor model with an expressive unknown nonlinear side information extractor is proposed for under-counted multi-aspect data. A joint low-rank tensor completion and neural network learning algorithm is designed to recover the model. Moreover, the UC-TC formulation is supported by theoretical analysis showing that the fully counted entries of the tensor and each entry's under-counting probability can be provably recovered from partial observations -- under reasonable conditions. To our best knowledge, the result is the first to offer theoretical supports for under-counted multi-aspect data completion. Simulations and real-data experiments corroborate the theoretical claims.

In this paper, we consider the problem of generalised visual object counting, with the goal of developing a computational model for counting the number of objects from arbitrary semantic categories, using arbitrary number of "exemplars", i.e. zero-shot or few-shot counting. To this end, we make the following four contributions: (1) We introduce a novel transformer-based architecture for generalised visual object counting, termed as Counting Transformer (CounTR), which explicitly capture the similarity between image patches or with given "exemplars" with the attention mechanism;(2) We adopt a two-stage training regime, that first pre-trains the model with self-supervised learning, and followed by supervised fine-tuning;(3) We propose a simple, scalable pipeline for synthesizing training images with a large number of instances or that from different semantic categories, explicitly forcing the model to make use of the given "exemplars";(4) We conduct thorough ablation studies on the large-scale counting benchmark, e.g. FSC-147, and demonstrate state-of-the-art performance on both zero and few-shot settings.

Visual counting is a fundamental pillar of multimodal intelligence, requiring a seamless integration of fine-grained grounding and spatial reasoning. While Multimodal Large Language Models (MLLMs) have achieved remarkable success in qualitative scene understanding, their quantitative precision remains a significant bottleneck, often characterized by persistent numerical hallucinations. Existing counting benchmarks primarily focus on basic perception in simplified contexts, failing to capture the complex failure modes that emerge under logical constraints or adversarial conditions. To address these limitations, we introduce HoloCount, a holistic and diagnostically rich benchmark structured around a three-level hierarchical taxonomy. HoloCount evaluates MLLMs across: (1) Semantic Counting, focusing on atomic and property-based enumeration; (2) Analytical Counting, assessing logical composition through spatial and set-based reasoning; and (3) Robustness Testing, probing model integrity against adverse scenarios and grounded counter-priors, such as high-density scenes and linguistic biases. Through an exhaustive evaluation of over 20 state-of-the-art MLLMs, we reveal a critical performance gap: even top-tier models degrade significantly as tasks transition from perception to complex analytical reasoning and adverse scenarios. Our findings provide a systematic landscape of current MLLM counting capabilities and offer a roadmap for developing more grounded and reliable multimodal systems. The dataset is available at https://mm-mvr.github.io/HoloCount/.

Active matter systems, from self-propelled colloids to motile bacteria, are characterized by the conversion of free energy into useful work at the microscopic scale. These systems generically involve physics beyond the reach of equilibrium statistical mechanics, and a persistent challenge has been to understand the nature of their nonequilibrium states. The entropy production rate and the magnitude of the steady-state probability current provide quantitative ways to do so by measuring the breakdown of time-reversal symmetry and the strength of nonequilibrium transport of measure. Yet, their efficient computation has remained elusive, as they depend on the system's unknown and high-dimensional probability density. Here, building upon recent advances in generative modeling, we develop a deep learning framework that estimates the score of this density. We show that the score, together with the microscopic equations of motion, gives direct access to the entropy production rate, the probability current, and their decomposition into local contributions from individual particles, spatial regions, and degrees of freedom. To represent the score, we introduce a novel, spatially-local transformer-based network architecture that learns high-order interactions between particles while respecting their underlying permutation symmetry. We demonstrate the broad utility and scalability of the method by applying it to several high-dimensional systems of interacting active particles undergoing motility-induced phase separation (MIPS). We show that a single instance of our network trained on a system of 4096 particles at one packing fraction can generalize to other regions of the phase diagram, including systems with as many as 32768 particles. We use this observation to quantify the spatial structure of the departure from equilibrium in MIPS as a function of the number of particles and the packing fraction.

Scientific measurements such as single-cell RNA (scRNA) sequencing often take the form of nonnegative integer counts, whereas continuous-state diffusion models approximate this discrete structure using continuous coordinates. Building on stochastic chemical reaction networks (CRNs), a class of count-native Markov jump processes, we introduce CRNDiff, a structured framework that combines count-space diffusion with inference-time conditioning on rare subpopulations. An independent birth--death instantiation yields a closed-form transition kernel for forward noising. This kernel enables reverse sampling via forward-filtering backward-sampling (FFBS) and supports data-driven selection of the terminal noising time, eliminating the need for a validation sweep. This tractability also lets us introduce tilted Feynman--Kac (FK) steering, a method for sampling target subpopulations from a frozen generator without retraining. By tilting posterior marginals before FK particle correction, steering mitigates importance-weight concentration when the target population is rare. Using scRNA-seq data from the human heart cell atlas, we test the ability of CRNDiff to generate cell-type-specific distributions. Across the three evaluated target populations, CRNDiff achieves the highest conditional fidelity among the evaluated generative models, with larger mean purity margins for rarer target populations. Generated cells preserve marker-level differential-expression structure. Replacing real training cells for the target classes with generated cells yields downstream classification performance approaching that of the real-data reference.

Visually cataloging and quantifying the natural world requires pushing the boundaries of both detailed visual classification and counting at scale. Despite significant progress, particularly in crowd and traffic analysis, the fine-grained, taxonomy-aware plant counting remains underexplored in vision. In contrast to crowds, plants exhibit nonrigid morphologies and physical appearance variations across growth stages and environments. To fill this gap, we present TPC-268, the first plant counting benchmark incorporating plant taxonomy. Our dataset couples instance-level point annotations with Linnaean labels (kingdom -> species) and organ categories, enabling hierarchical reasoning and species-aware evaluation. The dataset features 10,000 images with 678,050 point annotations, includes 268 countable plant categories over 242 plant species in Plantae and Fungi, and spans observation scales from canopy-level remote sensing imagery to tissue-level microscopy. We follow the problem setting of class-agnostic counting (CAC), provide taxonomy-consistent, scale-aware data splits, and benchmark state-of-the-art regression- and detection-based CAC approaches. By capturing the biodiversity, hierarchical structure, and multi-scale nature of botanical and mycological taxa, TPC-268 provides a biologically grounded testbed to advance fine-grained class-agnostic counting. Dataset and code are available at https://github.com/tiny-smart/TPC-268.

Micro-actions are short-duration, low-amplitude subtle body movements at the whole-body level that can reveal latent intentions, involuntary reactions, and fine-grained affective changes. Our previous MA-52 benchmark has provided an important foundation for micro-action recognition, but it remains limited in scale, scene diversity, task coverage, and evaluation protocols. To advance micro-action analysis toward more realistic and comprehensive settings, we introduce MMA-82, a large-scale multi-domain extension of MA-52. MMA-82 expands the label space from 52 to 82 fine-grained micro-action categories and covers four distinct domains, including laboratory interviews, street interviews, psychiatric patient interviews, and emotion-rich television videos, resulting in 77,856 annotated instances from 454 subjects. Built upon MMA-82, we establish two core tasks: Micro-Action Recognition and Multi-label Micro-Action Detection. For recognition, we further define in-domain and cross-domain protocols, including few-shot and zero-shot settings, to evaluate model robustness, transferability, and generalization. Extensive experiments show that current methods still struggle with realistic micro-action understanding, especially under domain shift, long-tailed category distributions, and complex temporal localization. Beyond benchmarking, we investigate the relationship between micro-actions and emotion, showing that micro-actions are strongly associated with emotional states and provide complementary cues to facial micro-expressions for improved emotion recognition. These results demonstrate that MMA-82 serves as a comprehensive and challenging benchmark for realistic micro-action analysis and a valuable resource for human-centered AI. MMA-82 is available at https://lpynow.github.io/MMA-82-AIM/.

Large language models (LLMs), despite strong performance on complex mathematical problems, exhibit systematic limitations in counting tasks. This issue arises from architectural limits of transformers, where counting is performed across layers, leading to degraded precision for larger counting problems due to depth constraints. To address this limitation, we propose a simple test-time strategy inspired by System-2 cognitive processes that decomposes large counting tasks into smaller, independent sub-problems that the model can reliably solve. We evaluate this approach using observational and causal mediation analyses to understand the underlying mechanism of this System-2-like strategy. Our mechanistic analysis identifies key components: latent counts are computed and stored in the final item representations of each part, transferred to intermediate steps via dedicated attention heads, and aggregated in the final stage to produce the total count. Experimental results demonstrate that this strategy enables LLMs to surpass architectural limitations and achieve high accuracy on large-scale counting tasks. This work provides mechanistic insight into System-2 counting in LLMs and presents a generalizable approach for improving and understanding their reasoning behavior.

In crowd counting, each training image contains multiple people, where each person is annotated by a dot. Existing crowd counting methods need to use a Gaussian to smooth each annotated dot or to estimate the likelihood of every pixel given the annotated point. In this paper, we show that imposing Gaussians to annotations hurts generalization performance. Instead, we propose to use Distribution Matching for crowd COUNTing (DM-Count). In DM-Count, we use Optimal Transport (OT) to measure the similarity between the normalized predicted density map and the normalized ground truth density map. To stabilize OT computation, we include a Total Variation loss in our model. We show that the generalization error bound of DM-Count is tighter than that of the Gaussian smoothed methods. In terms of Mean Absolute Error, DM-Count outperforms the previous state-of-the-art methods by a large margin on two large-scale counting datasets, UCF-QNRF and NWPU, and achieves the state-of-the-art results on the ShanghaiTech and UCF-CC50 datasets. DM-Count reduced the error of the state-of-the-art published result by approximately 16%. Code is available at https://github.com/cvlab-stonybrook/DM-Count.

Recently, the problem of inaccurate learning targets in crowd counting draws increasing attention. Inspired by a few pioneering work, we solve this problem by trying to predict the indices of pre-defined interval bins of counts instead of the count values themselves. However, an inappropriate interval setting might make the count error contributions from different intervals extremely imbalanced, leading to inferior counting performance. Therefore, we propose a novel count interval partition criterion called Uniform Error Partition (UEP), which always keeps the expected counting error contributions equal for all intervals to minimize the prediction risk. Then to mitigate the inevitably introduced discretization errors in the count quantization process, we propose another criterion called Mean Count Proxies (MCP). The MCP criterion selects the best count proxy for each interval to represent its count value during inference, making the overall expected discretization error of an image nearly negligible. As far as we are aware, this work is the first to delve into such a classification task and ends up with a promising solution for count interval partition. Following the above two theoretically demonstrated criterions, we propose a simple yet effective model termed Uniform Error Partition Network (UEPNet), which achieves state-of-the-art performance on several challenging datasets. The codes will be available at: https://github.com/TencentYoutuResearch/CrowdCounting-UEPNet.

Generalised object counting aims to estimate the number of instances of an arbitrary object category from a single image, but many recent methods can struggle on structurally complex objects due to limited spatial modelling. We present UpCount, a class-agnostic counter designed to better preserve spatial structure. UpCount strengthens the visual representation by extracting multi-layer features from a ViT-B/16 encoder and reassembling them into a refined multi-scale pyramid that is spatially refined using Dense Prediction Transformers and FeatUp, yielding features with improved structural and spatial sensitivity; a proposal--verification counting head then identifies repeated patterns and produces a density map for the final count. On FSC-147, UpCount achieves 12.39 MAE and 100.89 RMSE on the test set, and it transfers effectively to vehicle counting on CARPK (6.27 MAE, 8.79 RMSE). Code: https://github.com/r28112072-rgb/upcount

We propose YOLO-Count, a differentiable open-vocabulary object counting model that tackles both general counting challenges and enables precise quantity control for text-to-image (T2I) generation. A core contribution is the 'cardinality' map, a novel regression target that accounts for variations in object size and spatial distribution. Leveraging representation alignment and a hybrid strong-weak supervision scheme, YOLO-Count bridges the gap between open-vocabulary counting and T2I generation control. Its fully differentiable architecture facilitates gradient-based optimization, enabling accurate object count estimation and fine-grained guidance for generative models. Extensive experiments demonstrate that YOLO-Count achieves state-of-the-art counting accuracy while providing robust and effective quantity control for T2I systems.

Planning the transition to quantum-safe cryptosystems requires understanding the cost of quantum attacks on vulnerable cryptosystems. In Gidney+Ekerå 2019, I co-published an estimate stating that 2048 bit RSA integers could be factored in eight hours by a quantum computer with 20 million noisy qubits. In this paper, I substantially reduce the number of qubits required. I estimate that a 2048 bit RSA integer could be factored in less than a week by a quantum computer with less than a million noisy qubits. I make the same assumptions as in 2019: a square grid of qubits with nearest neighbor connections, a uniform gate error rate of 0.1%, a surface code cycle time of 1 microsecond, and a control system reaction time of 10 microseconds. The qubit count reduction comes mainly from using approximate residue arithmetic (Chevignard+Fouque+Schrottenloher 2024), from storing idle logical qubits with yoked surface codes (Gidney+Newman+Brooks+Jones 2023), and from allocating less space to magic state distillation by using magic state cultivation (Gidney+Shutty+Jones 2024). The longer runtime is mainly due to performing more Toffoli gates and using fewer magic state factories compared to Gidney+Ekerå 2019. That said, I reduce the Toffoli count by over 100x compared to Chevignard+Fouque+Schrottenloher 2024.

Zero-shot object counting (ZOC) aims to enumerate objects in images using only the names of object classes during testing, without the need for manual annotations. However, a critical challenge in current ZOC methods lies in their inability to identify high-quality exemplars effectively. This deficiency hampers scalability across diverse classes and undermines the development of strong visual associations between the identified classes and image content. To this end, we propose the Visual Association-based Zero-shot Object Counting (VA-Count) framework. VA-Count consists of an Exemplar Enhancement Module (EEM) and a Noise Suppression Module (NSM) that synergistically refine the process of class exemplar identification while minimizing the consequences of incorrect object identification. The EEM utilizes advanced vision-language pretaining models to discover potential exemplars, ensuring the framework's adaptability to various classes. Meanwhile, the NSM employs contrastive learning to differentiate between optimal and suboptimal exemplar pairs, reducing the negative effects of erroneous exemplars. VA-Count demonstrates its effectiveness and scalability in zero-shot contexts with superior performance on two object counting datasets.

We theoretically identify the noise-induced coherent contribution to the ergotropy of a four-level quantum heat engine coupled to a unimodal quantum cavity. We utilize a protocol where the passive state's quasiprobabilities can be analytically identified from the population-coherence coupled reduced density matrix. The reduced density matrix elements are evaluated using a microscopic quantum master equation formalism. Multiple ergotropies within the same coherence interval, each characterized by a positive and pronounced coherent contribution, are observed. These ergotropies are a result of population inversion as well as quasiprobability-population inversion, controllable through the coherence measure parameters. The optimal flux and power of the engine are found to be at moderate values of ergotropy with increasing values of noise-induced coherence. The optimal power at different coherences is found to possess a constant ergotropy.

Counting serves as a simple but powerful test of a Large Vision-Language Model's (LVLM's) reasoning; it forces the model to identify each individual object and then add them all up. In this study, we investigate how LVLMs implement counting using controlled synthetic and real-world benchmarks, combined with mechanistic analyses. Our results show that LVLMs display a human-like counting behavior, with precise performance on small numerosities and noisy estimation for larger quantities. We introduce two novel interpretability methods, Visual Activation Patching and HeadLens, and use them to uncover a structured "counting circuit" that is largely shared across a variety of visual reasoning tasks. Building on these insights, we propose a lightweight intervention strategy that exploits simple and abundantly available synthetic images to fine-tune arbitrary pretrained LVLMs exclusively on counting. Despite the narrow scope of this fine-tuning, the intervention not only enhances counting accuracy on in-distribution synthetic data, but also yields an average improvement of +8.36% on out-of-distribution counting benchmarks and an average gain of +1.54% on complex, general visual reasoning tasks for Qwen2.5-VL. These findings highlight the central, influential role of counting in visual reasoning and suggest a potential pathway for improving overall visual reasoning capabilities through targeted enhancement of counting mechanisms.

Diffusion models have shown remarkable progress in photorealistic image synthesis, yet they remain unreliable for generating scenes with a precise number of object instances, particularly in complex and high-density settings. We present CountLoop, a training-free framework that provides diffusion models with accurate instance control through iterative structured feedback. The approach alternates between image generation and multimodal agent evaluation, where a language-guided planner and critic assess object counts, spatial arrangements, and attribute consistency. This feedback is then used to refine layouts and guide subsequent generations. To further improve separation between objects, especially in occluded scenes, we introduce instance-driven attention masking and compositional generation techniques. Experiments on COCO Count, T2I CompBench, and two new high-instance benchmarks show that CountLoop achieves counting accuracy of up to 98% while maintaining spatial fidelity and visual quality, outperforming layout-based and gradient-guided baselines with a score of 0.97.

Accurate maize seedling detection is crucial for precision agriculture, yet curated datasets remain scarce. We introduce MSDD, a high-quality aerial image dataset for maize seedling stand counting, with applications in early-season crop monitoring, yield prediction, and in-field management. Stand counting determines how many plants germinated, guiding timely decisions such as replanting or adjusting inputs. Traditional methods are labor-intensive and error-prone, while computer vision enables efficient, accurate detection. MSDD contains three classes-single, double, and triple plants-capturing diverse growth stages, planting setups, soil types, lighting conditions, camera angles, and densities, ensuring robustness for real-world use. Benchmarking shows detection is most reliable during V4-V6 stages and under nadir views. Among tested models, YOLO11 is fastest, while YOLOv9 yields the highest accuracy for single plants. Single plant detection achieves precision up to 0.984 and recall up to 0.873, but detecting doubles and triples remains difficult due to rarity and irregular appearance, often from planting errors. Class imbalance further reduces accuracy in multi-plant detection. Despite these challenges, YOLO11 maintains efficient inference at 35 ms per image, with an additional 120 ms for saving outputs. MSDD establishes a strong foundation for developing models that enhance stand counting, optimize resource allocation, and support real-time decision-making. This dataset marks a step toward automating agricultural monitoring and advancing precision agriculture.

A fixed network of McCulloch-Pitts threshold units with weights in {-1,0,1} can hold other threshold networks in its state and run them: the state is a ring of banks of records, each record a unit of a stored network, and each step evaluates one record. We use such a network to carry out von Neumann's universal construction and self-reproduction exactly. As a cellular automaton keeps its rule, the fixed network keeps its weights, and what reproduces is a stored network. A constructor of 143 records reads the description of a network from its tape, builds that network in the next bank, copies the description onto the next tape and hands control to what it built; started on its own description, it rebuilds itself, weights included, in every generation. The scheme scales to a universal computer. A SUBLEQ computer of 17,598 ternary units, stored as 36,080 records and running a program of 27 instructions, builds any network that fits a bank and reproduces itself in the same way, at every word width from eight bits on; run directly, it emits the serialization of its own weights, memory and tape. Integer pre-activations give every orbit a margin of 1/2, and replicating each unit r times multiplies it by r. That suffices against noise of any size on the pre-activations, but against von Neumann's output flips only below a threshold inversely proportional to the fan-in. These results are proved in Rocq.

The flexibility and accuracy of methods for automatically counting objects in images and videos are limited by the way the object can be specified. While existing methods allow users to describe the target object with text and visual examples, the visual examples must be manually annotated inside the image, and there is no way to specify what not to count. To address these gaps, we introduce novel capabilities that expand how the target object can be specified. Specifically, we extend the prompt to enable what not to count to be described with text and/or visual examples, introduce the concept of `pseudo-exemplars' that automate the annotation of visual examples at inference, and extend counting models to accept visual examples from both natural and synthetic external images. We also use our new counting model, CountGD++, as a vision expert agent for an LLM. Together, these contributions expand the prompt flexibility of multi-modal open-world counting and lead to significant improvements in accuracy, efficiency, and generalization across multiple datasets. Code is available at https://github.com/niki-amini-naieni/CountGDPlusPlus.

Complex numerical time series analysis often demands multi-step reasoning capabilities beyond current models' reach. Tasks like medical diagnosis and weather forecasting require sequential reasoning processes - including counterfactual analysis, logical deduction, knowledge application, and multi-modal contextual integration - that existing time series models cannot explicitly perform. While recent research has shown large language models (LLMs) can achieve sophisticated Chain-of-Thought (CoT) reasoning through reinforcement learning (RL), these advances have primarily focused on mathematical and coding domains, with LLMs still demonstrating poor performance on time series tasks. We introduce Chain Of thought for Understanding Numerical Time Series (COUNTS), the first framework that trains LLMs to perform CoT reasoning across diverse time series tasks using RL with verifiable rewards. Our approach employs a Residual Vector-Quantized VAE to create high-fidelity discrete tokens that seamlessly integrate into a pre-trained LLM's vocabulary. COUNTS undergoes a two-stage training process: first, supervised fine-tuning on time series analysis tasks to master our novel representations, followed by Group Relative Policy Optimization training on verifiable problems using prompting strategies that encourage explicit reasoning steps before producing final answers. Our experiments demonstrate that this RL-driven approach with intermediate CoT reasoning significantly enhances LLM performance across various time series analysis tasks, opening new possibilities for complex temporal data reasoning.

Human body actions are an important form of non-verbal communication in social interactions. This paper focuses on a specific subset of body actions known as micro-actions, which are subtle, low-intensity body movements that provide a deeper understanding of inner human feelings. In real-world scenarios, human micro-actions often co-occur, with multiple micro-actions overlapping in time, such as simultaneous head and hand movements. However, current research primarily focuses on recognizing individual micro-actions while overlooking their co-occurring nature. To narrow this gap, we propose a new task named Multi-label Micro-Action Detection (MMAD), which involves identifying all micro-actions in a given short video, determining their start and end times, and categorizing them. Achieving this requires a model capable of accurately capturing both long-term and short-term action relationships to locate and classify multiple micro-actions. To support the MMAD task, we introduce a new dataset named Multi-label Micro-Action-52 (MMA-52), specifically designed to facilitate the detailed analysis and exploration of complex human micro-actions. The proposed MMA-52 dataset is available at: https://github.com/VUT-HFUT/Micro-Action.

Most crowd counting methods directly regress blockwise density maps using Mean Squared Error (MSE) losses. This practice has two key limitations: (1) it fails to account for the extreme spatial sparsity of annotations -- over 95% of 8x8 blocks are empty across standard benchmarks, so supervision signals in informative regions are diluted by the predominant zeros; (2) MSE corresponds to a Gaussian error model that poorly matches discrete, non-negative count data. To address these issues, we introduce ZIP, a scalable crowd counting framework that models blockwise counts with a Zero-Inflated Poisson likelihood: a zero-inflation term learns the probability a block is structurally empty (handling excess zeros), while the Poisson component captures expected counts when people are present (respecting discreteness). We provide a generalization analysis showing a tighter risk bound for ZIP than MSE-based losses and DMCount provided that the training resolution is moderately large. To assess the scalability of ZIP, we instantiate it on backbones spanning over 100x in parameters/compute. Experiments on ShanghaiTech A & B, UCF-QNRF, and NWPU-Crowd demonstrate that ZIP consistently surpasses state-of-the-art methods across all model scales.

Object counting in videos remains a poorly characterized capability of multimodal large language models. Counting questions are included in many existing VideoQA benchmarks, but the ground-truth count distributions in these benchmarks are heavily skewed toward small values. Across the nine benchmarks we survey, the median ground-truth count is at most five, and the three most frequent values together account for between 45% and 93% of the videos. The resulting mean accuracy is then dominated by the most frequent counts; a value-dependent bias at a rare count contributes negligibly to the average and remains invisible. We introduce CountVideoBench, a benchmark of 2,600 synthetic videos covering 26 cardinalities in the interval [5, 50] (100 videos each), grouped into six clusters of consecutive counts that span the range while enabling near-neighbor comparisons. Each video contains a single class of static objects under a controlled camera motion, removing object motion and reducing recognition as confounds. We evaluate sixteen video-language models from nine architecture families in a zero-shot setting. No model exceeds 27.6% Exact Match. The dependence of accuracy on cardinality varies across models, ranging from monotonic decline to a non-monotonic peak-and-collapse pattern, which rules out increasing difficulty with cardinality as the dominant explanation of counting failure. Every model further concentrates its predictions on its own set of preferred integers, with accuracy peaks coinciding with these values and collapsing at adjacent counts. These findings highlight the need for balanced, diagnostic counting benchmarks to reliably assess this fundamental visual capability.

Open-world object counting remains brittle: despite rapid advances in vision-language models (VLMs), reliably counting the objects a user intends is far from solved. We argue that a central reason is that counting granularity is left implicit; users may refer to a specific identity, an attribute, an instance type, a category, or an abstract concept, yet most methods treat "what to count" as a single, category-level matching problem. In this work, we redefine open-world counting as multi-grained counting, where visual exemplars specify target appearance and fine-grained text, with optional negative prompts, specifies the intended semantic granularity across five explicit levels. Making granularity explicit, however, exposes a critical data bottleneck: existing counting datasets lack the multi-category scenes, controlled distractors, and instance-level annotations needed to verify fine-grained prompt semantics. To address this, we propose the first fully automatic data-scaling pipeline that integrates controllable 3D synthesis with consistent image editing and VLM-based filtering, and use it to construct KubriCount, the largest and most comprehensively annotated counting dataset to date, supporting both training and multi-grained evaluation. Systematic benchmarking reveals that both multimodal large language models and specialist counting models exhibit severe prompt-following failures under fine-grained distinctions. Motivated by these findings, we train HieraCount, a multi-grained counting model that jointly leverages text and visual exemplars as complementary target specifications. HieraCount substantially improves multi-grained counting accuracy and generalizes robustly to challenging real-world scenarios. The project page is available here: https://verg-avesta.github.io/KubriCount/.

Large vision-language models (VLMs) can recognize what happens in video but fail to count how many times. We introduce PushupBench, 446 long-form clips (avg. 36.7s) for evaluating repetition counting. The best frontier model achieves 42.1\% exact accuracy; open-source 4B models score sim6\%, matching supervised baselines. We show that accuracy alone misleads -- weaker models exploit the modal count rather than reason temporally. Fine-tuning on counting with 1k samples transfers to general video understanding: MVBench (+2.15), PerceptionTest (+1.88), TVBench (+4.54), suggesting counting is a proxy for broader temporal reasoning.PushupBench incorporated in lmms-eval (https://github.com/EvolvingLMMs-Lab/lmms-eval/pull/1262) and hosted on (pushupbench.com/)

We construct modular-invariant torus partition functions with a unique vacuum, discrete energy levels and positive integer degeneracies by recursively repairing the Maloney--Witten--Keller modular completion of the Virasoro vacuum. Exact modular repairs and finite moment matching discretize successive spectral bands while preserving earlier levels and controlling convergence. For c_L=c_R=c and a=(c-1)/12, the construction realizes primary dimension gaps Δ_1=(1+κ)a for sufficiently small fixed κ>0, and Δ_1=a+δ for any fixed δge0, at every sufficiently large real c. Every nonvacuum primary satisfies h,bar hge(c-1)/24. In the fixed-δ family, spectra can be chosen whose densities of states, smoothed with a fixed nonnegative normalized smooth kernel of compact support, match the correspondingly smoothed prediction of a single perturbative BTZ saddle through every fixed finite order in 1/c. The count includes all spins and Virasoro descendants. Its logarithm reproduces the Bekenstein--Hawking entropy and its corrections at every fixed positive E/c, where E=Δ-c/12. This includes 0<E<c/12, where thermal AdS dominates the canonical ensemble.

Generative modeling is widely regarded as one of the most essential problems in today's AI community, with text-to-image generation having gained unprecedented real-world impacts. Among various approaches, diffusion models have achieved remarkable success and have become the de facto solution for text-to-image generation. However, despite their impressive performance, these models exhibit fundamental limitations in adhering to numerical constraints in user instructions, frequently generating images with an incorrect number of objects. While several prior works have mentioned this issue, a comprehensive and rigorous evaluation of this limitation remains lacking. To address this gap, we introduce T2ICountBench, a novel benchmark designed to rigorously evaluate the counting ability of state-of-the-art text-to-image diffusion models. Our benchmark encompasses a diverse set of generative models, including both open-source and private systems. It explicitly isolates counting performance from other capabilities, provides structured difficulty levels, and incorporates human evaluations to ensure high reliability. Extensive evaluations with T2ICountBench reveal that all state-of-the-art diffusion models fail to generate the correct number of objects, with accuracy dropping significantly as the number of objects increases. Additionally, an exploratory study on prompt refinement demonstrates that such simple interventions generally do not improve counting accuracy. Our findings highlight the inherent challenges in numerical understanding within diffusion models and point to promising directions for future improvements.

Object counting methods typically rely on manually annotated datasets. The cost of creating such datasets has restricted the versatility of these networks to count objects from specific classes (such as humans or penguins), and counting objects from diverse categories remains a challenge. The availability of robust text-to-image latent diffusion models (LDMs) raises the question of whether these models can be utilized to generate counting datasets. However, LDMs struggle to create images with an exact number of objects based solely on text prompts but they can be used to offer a dependable sorting signal by adding and removing objects within an image. Leveraging this data, we initially introduce an unsupervised sorting methodology to learn object-related features that are subsequently refined and anchored for counting purposes using counting data generated by LDMs. Further, we present a density classifier-guided method for dividing an image into patches containing objects that can be reliably counted. Consequently, we can generate counting data for any type of object and count them in an unsupervised manner. Our approach outperforms other unsupervised and few-shot alternatives and is not restricted to specific object classes for which counting data is available. Code to be released upon acceptance.

State space models (SSM) have been widely applied for the analysis and visualization of large sequential datasets. Sequential Monte Carlo (SMC) is a very popular particle-based method to sample latent states from intractable posteriors. However, SSM is significantly influenced by the choice of the proposal. Recently Hamiltonian Monte Carlo (HMC) sampling has shown success in many practical problems. In this paper, we propose an SMC augmented by HMC (HSMC) for inference and model learning of nonlinear SSM, which can exempt us from learning proposals and reduce the model complexity significantly. Based on the measure preserving property of HMC, the particles directly generated by transition function can approximate the posterior of latent states arbitrarily well. In order to better adapt to the local geometry of latent space, the HMC is conducted on Riemannian manifold defined by a positive definite metric. In addition, we show that the proposed HSMC method can improve SSMs realized by both Gaussian Processes (GP) and Neural Network (NN).

Purpose. Patients with advanced cancer may undergo multiple lines of treatment, switching therapies as their disease progresses. Motivated by a study of metastatic prostate cancer, we develop a microsimulation framework to study therapy sequence. Methods. We propose a discrete-time state transition model to study two lines of anti-cancer therapy. Based on digitized published progression-free survival (PFS) and overall survival (OS) curves, we infer event types (progression or death), and estimate transition probabilities using cumulative incidence functions with competing risks. Our model incorporates within-patient dependence over time, such that response to first-line therapy informs subsequent event probabilities. Parameters governing the degree of within-patient dependence can be used to calibrate the model-based results to those of a target trial. We demonstrate these methods in a study of two therapy sequences for metastatic prostate cancer, where Docetaxel (DCT) and Abiraterone Acetate (AA) are both appropriate for use in either first or second line treatment. We assess costs, Quality-Adjusted Life Years (QALYs) and Incremental Cost Effectiveness Ratio (ICER) for two treatment strategies: DCT then AA vs AA then DCT. Results. Using digitized survival curves from relevant clinical trials, we identified 8.6-13.9% of PFS times that should be categorized as deaths, allowing for estimation of cumulative incidence functions. Models assuming within-patient independence overestimated OS time, corrected with our calibration approach. Correction resulted in meaningful changes in the difference in QALYs between treatment strategies (0.07 vs 0.15) and the ICER (-\76,836/QALY vs -21,030/QALY). Conclusions. Microsimulation models can be successfully used to study cost-effectiveness of therapy sequences, taking care to account correctly for within-patient dependence.

We revisit quantum phase estimation algorithms for the purpose of obtaining the energy levels of many-body Hamiltonians and pay particular attention to the statistical analysis of their outputs. We introduce the mean phase direction of the parent distribution associated with eigenstate inputs as a new post-processing tool. By connecting it with the unknown phase, we find that if used as its direct estimator, it exceeds the accuracy of the standard majority rule using one less bit of resolution, making evident that it can also be inverted to provide unbiased estimation. Moreover, we show how to directly use this quantity to accurately find the energy levels when the initialized state is an eigenstate of the simulated propagator during the whole time evolution, which allows for shallower algorithms. We then use IBM Q hardware to carry out the digital quantum simulation of three toy models: a two-level system, a two-spin Ising model and a two-site Hubbard model at half-filling. Methodologies are provided to implement Trotterization and reduce the variability of results in noisy intermediate scale quantum computers.

The Eigenstate Thermalization Hypothesis (ETH) has been established as a cornerstone for understanding thermalization in quantum many-body systems. Recently, there has been growing interest in the full ETH, which extends the framework of the conventional ETH and postulates a smooth function to describe the multi-point correlations among matrix elements. Within this framework, free cumulants play a central role, and most previous studies have primarily focused on closed systems. In this paper, we extend the analysis to a system-bath setup, considering both an idealized case with a random-matrix bath and a more realistic scenario where the bath is modeled as a defect Ising chain. In both cases, we uncover a universal scaling of microcanonical free cumulants of system observables with respect to the interaction strength. Furthermore we establish a connection between this scaling behavior and the thermalization dynamics of the thermal free cumulants of corresponding observables.

Object counting is pivotal for understanding the composition of scenes. Previously, this task was dominated by class-specific methods, which have gradually evolved into more adaptable class-agnostic strategies. However, these strategies come with their own set of limitations, such as the need for manual exemplar input and multiple passes for multiple categories, resulting in significant inefficiencies. This paper introduces a new, more practical approach enabling simultaneous counting of multiple object categories using an open vocabulary framework. Our solution, OmniCount, stands out by using semantic and geometric insights from pre-trained models to count multiple categories of objects as specified by users, all without additional training. OmniCount distinguishes itself by generating precise object masks and leveraging point prompts via the Segment Anything Model for efficient counting. To evaluate OmniCount, we created the OmniCount-191 benchmark, a first-of-its-kind dataset with multi-label object counts, including points, bounding boxes, and VQA annotations. Our comprehensive evaluation in OmniCount-191, alongside other leading benchmarks, demonstrates OmniCount's exceptional performance, significantly outpacing existing solutions and heralding a new era in object counting technology.

We prove that temporal control of the strengths of springs connecting N harmonic oscillators in a chain provides complete access to all Gaussian states of N-1 collective modes. The proof relies on the construction of a suitable basis of cradle modes for the system. An iterative algorithm to reach any desired Gaussian state requires at most 3N(N-1)/2 operations. We illustrate this capability by engineering squeezed pseudo-phonon states - highly non-local, strongly correlated states that may result from various nonlinear processes. Tunable chains of coupled harmonic oscillators can be implemented by a number of current state-of-the-art experimental platforms, including cold atoms in lattice potentials, arrays of mechanical micro-oscillators, and coupled optical waveguides.

We introduce T-Rex, an interactive object counting model designed to first detect and then count any objects. We formulate object counting as an open-set object detection task with the integration of visual prompts. Users can specify the objects of interest by marking points or boxes on a reference image, and T-Rex then detects all objects with a similar pattern. Guided by the visual feedback from T-Rex, users can also interactively refine the counting results by prompting on missing or falsely-detected objects. T-Rex has achieved state-of-the-art performance on several class-agnostic counting benchmarks. To further exploit its potential, we established a new counting benchmark encompassing diverse scenarios and challenges. Both quantitative and qualitative results show that T-Rex possesses exceptional zero-shot counting capabilities. We also present various practical application scenarios for T-Rex, illustrating its potential in the realm of visual prompting.

The Mpemba effect is a thermodynamic anomaly in which a system farther away in temperature from equilibrium thermalizes before one that is initially closer. The effect has been experimentally observed across a wide range of systems, including water, colloids, and trapped ions. It has recently been the focus of numerous studies aimed at understanding its mechanisms and developing multiple applications. Despite extensive work in the field, clearly determining which types of systems exhibit the Mpemba effect remains an open question. To address this, we derive simple necessary conditions on the transition rates for the Mpemba effect in a Markovian 3-level system and show that they can be applied to study the Mpemba effect in an N-level system. Multiple time scales govern thermalization in these systems. This allows the evolution to occur more quickly across larger temperature differences, explaining the Mpemba effect. We apply our protocol to evaluate which types of systems exhibit the Mpemba effect and, in doing so, explain why the Mpemba effect in Markovian systems remains a thermodynamic anomaly. In particular, due to the maximum entropy principle, our conditions allow us to discard the sub-Ohmic and Ohmic spectra. The latter describes a wide range of physical and chemical phenomena, which will not exhibit the Mpemba effect. Moreover, our results provide a clear path to determine the minimal physical requirements for the Mpemba effect, and we apply them to understand its underlying mechanisms better. Finally, our protocol could help identify relevant parameters for experiments, numerical simulations and diverse applications.

Preparing high-fidelity logical magic states is crucial for fault-tolerant quantum computation. Among prior attempts to reduce the substantial cost of magic state preparation, magic state cultivation (MSC), a recently proposed protocol for preparing T states without magic state distillation, achieves state-of-the-art efficiency. Inspired by this work, we propose a new MSC procedure that would produce a logical T state on a rotated surface code at a further reduced cost. For our MSC protocol, we define a new code family, the RP^2 code, by putting the rotated surface code on RP^2 (a two-dimensional manifold), as well as two self-dual CSS codes named SRP-3 and SRP-5 respectively. Small RP^2 codes are used to hold logical information and checked by syndrome extraction (SE) circuits. We design fast morphing circuits that enable switching between a distance 3 (5) RP^2 code and an SRP-3 (SRP-5) code on which we can efficiently check the correctness of the logical state. To preserve the high accuracy of the cultivated logical T state, we design an efficient and easy-to-decode expansion stage that grows a small RP^2 code to a large rotated surface code in one round. Our MSC protocol utilizes non-local connectivity, available on both neutral atom array and ion trap platforms. According to our Monte Carlo sampling results, our MSC protocol requires about an order of magnitude smaller space-time volume to reach a target logical error rate around 10^{-9} compared to the original MSC protocol.

Crowd counting is a fundamental problem in crowd analysis which is typically accomplished by estimating a crowd density map and summing over the density values. However, this approach suffers from background noise accumulation and loss of density due to the use of broad Gaussian kernels to create the ground truth density maps. This issue can be overcome by narrowing the Gaussian kernel. However, existing approaches perform poorly when trained with ground truth density maps with broad kernels. To deal with this limitation, we propose using conditional diffusion models to predict density maps, as diffusion models show high fidelity to training data during generation. With that, we present CrowdDiff that generates the crowd density map as a reverse diffusion process. Furthermore, as the intermediate time steps of the diffusion process are noisy, we incorporate a regression branch for direct crowd estimation only during training to improve the feature learning. In addition, owing to the stochastic nature of the diffusion model, we introduce producing multiple density maps to improve the counting performance contrary to the existing crowd counting pipelines. We conduct extensive experiments on publicly available datasets to validate the effectiveness of our method. CrowdDiff outperforms existing state-of-the-art crowd counting methods on several public crowd analysis benchmarks with significant improvements.

Many hybrid quantum-classical algorithms for the application of ground state energy estimation in quantum chemistry involve estimating the expectation value of a molecular Hamiltonian with respect to a quantum state through measurements on a quantum device. To guide the selection of measurement methods designed for this observable estimation problem, we propose a benchmark called CSHOREBench (Common States and Hamiltonians for ObseRvable Estimation Benchmark) that assesses the performance of these methods against a set of common molecular Hamiltonians and common states encountered during the runtime of hybrid quantum-classical algorithms. In CSHOREBench, we account for resource utilization of a quantum computer through measurements of a prepared state, and a classical computer through computational runtime spent in proposing measurements and classical post-processing of acquired measurement outcomes. We apply CSHOREBench considering a variety of measurement methods on Hamiltonians of size up to 16 qubits. Our discussion is aided by using the framework of decision diagrams which provides an efficient data structure for various randomized methods and illustrate how to derandomize distributions on decision diagrams. In numerical simulations, we find that the methods of decision diagrams and derandomization are the most preferable. In experiments on IBM quantum devices against small molecules, we observe that decision diagrams reduces the number of measurements made by classical shadows by more than 80%, that made by locally biased classical shadows by around 57%, and consistently require fewer quantum measurements along with lower classical computational runtime than derandomization. Furthermore, CSHOREBench is empirically efficient to run when considering states of random quantum ansatz with fixed depth.

Conversational memory changes during use, so endpoint question answering alone cannot establish how a persistent state accumulates, ages, or incorporates revisions. We introduce LSREP, a Longitudinal State-Replay Evaluation Protocol combining ordered replay, explicit lifecycle schedules, repeated probes, evolving reference answers, and mechanism-fidelity checks. Its architectural case study is ICE v2, a local-first memory middleware with typed stores, retrieval fusion, and dynamic context budgets. The private, single-user instantiation contains 1,985 turns, 219 distinct probes, and 1,211 probe-checkpoint observations across 52 checkpoints. On three ordinary-density datasets, ICE v2 has a near-zero mean quality difference from vector-RAG while selecting 32% fewer fragments but using 6.6% more estimated prompt tokens. A fourth, dense dataset exposes catastrophic failures of the unbudgeted baseline. The fidelity audit limits attribution: procedural retrieval is defective, several mechanisms are unexercised, and graph utility is not established. In a complementary matched public diagnostic, ICE v2 loses decisively to pure vector-RAG on LongMemEval: 50.8% versus 72.8% in the evidence-only oracle and 43.0% versus 69.5% in full-S. Paired differences are -22.0 points (95% CI [-26.6, -17.4]) and -26.5 ([-31.3, -21.8]). Conservative abstention accompanies severe multi-session and temporal failures. ICE uses less context in this diagnostic, establishing a quality-cost trade-off rather than superior efficiency. Together, replay, fidelity auditing, and public endpoint testing expose distinct failure modes that neither architectural descriptions nor aggregate scores identify alone.

We present a rigorous analysis of the algebraic and geometric structure of the quantum complexity resource of a system of bosonic modes in Gaussian boson sampling. This resource underlies the quantum advantage of the system: its photon-counting statistics require the evaluation of a hafnian of the resource covariance matrix, and that computation is #P-hard. The resource covariance matrix is the solution of a semidefinite program that extracts the minimum-trace physical quantum part of the total covariance matrix; the complementary part is positive semidefinite and can therefore be simulated classically. Earlier work characterized this resource only through the trace of the quantum part, equal to its photon number. We characterize the optimizer itself, as a quantum state and as a geometric object, beyond the scalar given by its trace. We prove that it is a unique pure Gaussian state and construct an explicit oracle map, obeying an algebraic Riccati identity, that reconstructs the resource. We prove that the full problem compresses exactly onto the active symplectic sector that the dual program support generates. The passive-diagonalizable states are solved in closed form, the first explicit solvable class, and the whole program is shown to be equivalent to a minimization over the symplectic group, that is, over the Siegel upper half-space. Together these results establish that the program determines a canonical localized pure Gaussian component of the resource, and they provide the structural foundation for its detailed analysis.

This study presents a collection of physical devices and software services that fully automate Raman spectra measurements for liquid samples within a robotic facility. This method is applicable to various fields, with demonstrated efficacy in biotechnology, where Raman spectroscopy monitors substrates, metabolites, and product-related concentrations. Our system specifically measures 50 micro L samples using a liquid handling robot capable of taking 8 samples simultaneously. We record multiple Raman spectra for 10s each. Furthermore, our system takes around 20s for sample handling, cleaning, and preparation of the next measurement. All spectra and metadata are stored in a database, and we use a machine learning model to estimate concentrations from the spectra. This automated approach enables gathering spectra for various applications under uniform conditions in high-throughput fermentation processes, calibration procedures, and offline evaluations. This allows data to be combined to train sophisticated machine learning models with improved generalization. Consequently, we can develop accurate models more quickly for new applications by reusing data from prior applications, thereby reducing the need for extensive calibration data.

We address the problem of few-shot pattern detection, which aims to detect all instances of a given pattern, typically represented by a few exemplars, from an input image. Although similar problems have been studied in few-shot object counting and detection (FSCD), previous methods and their benchmarks have narrowed patterns of interest to object categories and often fail to localize non-object patterns. In this work, we propose a simple yet effective detector based on template matching and regression, dubbed TMR. While previous FSCD methods typically represent target exemplars as spatially collapsed prototypes and lose structural information, we revisit classic template matching and regression. It effectively preserves and leverages the spatial layout of exemplars through a minimalistic structure with a small number of learnable convolutional or projection layers on top of a frozen backbone We also introduce a new dataset, dubbed RPINE, which covers a wider range of patterns than existing object-centric datasets. Our method outperforms the state-of-the-art methods on the three benchmarks, RPINE, FSCD-147, and FSCD-LVIS, and demonstrates strong generalization in cross-dataset evaluation.

The use of machine learning algorithms to investigate phase transitions in physical systems is a valuable way to better understand the characteristics of these systems. Neural networks have been used to extract information of phases and phase transitions directly from many-body configurations. However, one limitation of neural networks is that they require the definition of the model architecture and parameters previous to their application, and such determination is itself a difficult problem. In this paper, we investigate for the first time the relationship between the accuracy of neural networks for information of phases and the network configuration (that comprises the architecture and hyperparameters). We formulate the phase analysis as a regression task, address the question of generating data that reflects the different states of the physical system, and evaluate the performance of neural architecture search for this task. After obtaining the optimized architectures, we further implement smart data processing and analytics by means of neuron coverage metrics, assessing the capability of these metrics to estimate phase transitions. Our results identify the neuron coverage metric as promising for detecting phase transitions in physical systems.

Diffusion models have excelled at generative tasks for both continuous and token-based domains, but their application to discrete ordinal data remains underdeveloped. We present CountsDiff, a diffusion framework designed to model distributions on the natural numbers. CountsDiff extends the Blackout diffusion framework by simplifying its formulation through a direct parameterization in terms of a survival probability schedule and an explicit loss weighting. This introduces flexibility through design parameters with direct analogues in existing diffusion modeling frameworks. Beyond this reparameterization, CountsDiff introduces features from modern diffusion models, previously absent in counts-based domains, including continuous-time training, classifier-free guidance, and churn/remasking reverse dynamics that allow non-monotone reverse trajectories. We propose an initial instantiation of CountsDiff and validate it on natural image datasets (CIFAR-10, CelebA), exploring the effects of the introduced design parameters in a complex, well-studied, and interpretable data domain. We then highlight biological count assays as a natural use case, evaluating CountsDiff on single-cell RNA-seq imputation in fetal and heart cell atlases. Remarkably, we find that even this simple instantiation matches or surpasses the performance of a state-of-the-art discrete generative model and leading scRNA-seq imputation methods, while leaving substantial headroom for further gains through optimized design choices in future work.

We present a tool QSeqSim, a Qiskit-integrated symbolic backend that fills the current gap of having no Qiskit-native support for simulating while-loop quantum programs and their induced sequential quantum circuits. QSeqSim takes Qiskit QuantumCircuit objects, translates them into OpenQASM 3 code, and organises the resulting program into a combination of combinational, dynamic, and sequential circuits, thereby assigning while-loops a precise sequential circuit semantics with explicit internal and external qubits. Building on this semantics, QSeqSim adopts a Binary Decision Diagram (BDD)-based symbolic representation and integrates weighted model counting to compute measurement probabilities efficiently by exploiting sharing in structured and sparse BDDs. On top of this Boolean backbone, it introduces dedicated symbolic operators for state composition and state retention, thereby enabling efficient symbolic execution of sequential quantum circuits. Our experiments demonstrate that QSeqSim scales to substantial while-induced sequential circuits; in particular, in the quantum random walk benchmark we successfully simulate circuits with over 1000 qubits for more than 10 loop iterations. QSeqSim is available at https://github.com/Veri-Q/QSeqSim.

In contrast to entropy, which increases monotonically, the "complexity" or "interestingness" of closed systems seems intuitively to increase at first and then decrease as equilibrium is approached. For example, our universe lacked complex structures at the Big Bang and will also lack them after black holes evaporate and particles are dispersed. This paper makes an initial attempt to quantify this pattern. As a model system, we use a simple, two-dimensional cellular automaton that simulates the mixing of two liquids ("coffee" and "cream"). A plausible complexity measure is then the Kolmogorov complexity of a coarse-grained approximation of the automaton's state, which we dub the "apparent complexity." We study this complexity measure, and show analytically that it never becomes large when the liquid particles are non-interacting. By contrast, when the particles do interact, we give numerical evidence that the complexity reaches a maximum comparable to the "coffee cup's" horizontal dimension. We raise the problem of proving this behavior analytically.

We introduce a semidefinite programming algorithm to find the minimal quantum Fisher information compatible with an arbitrary dataset of mean values. This certification task allows one to quantify the resource content of a quantum system for metrology applications without complete knowledge of the quantum state. We implement the algorithm to study quantum spin ensembles. We first focus on Dicke states, where our findings challenge and complement previous results in the literature. We then investigate states generated during the one-axis twisting dynamics, where in particular we find that the metrological power of the so-called multi-headed cat states can be certified using simple collective spin observables, such as fourth-order moments for small systems, and parity measurements for arbitrary system sizes.

The system-size scaling of bipartite entanglement can be used to detect phase transitions. We develop a related approach for strongly correlated electron models where large density matrices or large system size scaling are inaccessible. To this end, we demonstrate that phase transitions of various kinds are signaled by a sharp signature in the first- or second-order logarithmic derivatives of the negativity measuring entanglement between small clusters at varying distances. Crucially, we show how to mitigate the effect of quantum Monte Carlo noise at large distances when computing the negativity. Our focus is on the t'-π-flux Hubbard model using auxiliary-field quantum Monte Carlo simulations. It has the particular advantage of showing three distinct phase transitions in a single model: semimetal to band insulator, semimetal to antiferromagnetic Mott insulator, and a magnetic order-disorder transition belonging to the Gaussian, Gross-Neveu, and O(3) Wilson-Fisher universality classes, respectively.

In this work, we introduce a novel approach for predicting thermodynamic properties of binary mixtures, which we call the similarity-based method (SBM). The method is based on quantifying the pairwise similarity of components, which we achieve by comparing quantum-chemical descriptors of the components, namely σ-profiles. The basic idea behind the approach is that mixtures with similar pairs of components will have similar thermodynamic properties. The SBM is trained on a matrix that contains some data for a given property for different binary mixtures; the missing entries are then predicted by the SBM. As an example, we consider the prediction of isothermal activity coefficients at infinite dilution (γ^infty_{ij}) and show that the SBM outperforms the well-established physical methods modified UNIFAC (Dortmund) and COSMO-SAC-dsp. In this case, the matrix is only sparsely occupied, and it is shown that the SBM works also if only a limited number of data for similar mixtures is available. The SBM idea can be transferred to any mixture property and is a powerful tool for generating essential data for many applications.

Automated exercise repetition counting has applications across the physical fitness realm, from personal health to rehabilitation. Motivated by the ubiquity of mobile phones and the benefits of tracking physical activity, this study explored the feasibility of counting exercise repetitions in real-time, using only on-device inference, on smartphones. In this work, after providing an extensive overview of the state-of-the-art automatic exercise repetition counting methods, we introduce a deep learning based exercise repetition counting system for smartphones consisting of five components: (1) Pose estimation, (2) Thresholding, (3) Optical flow, (4) State machine, and (5) Counter. The system is then implemented via a cross-platform mobile application named P\=uioio that uses only the smartphone camera to track repetitions in real time for three standard exercises: Squats, Push-ups, and Pull-ups. The proposed system was evaluated via a dataset of pre-recorded videos of individuals exercising as well as testing by subjects exercising in real time. Evaluation results indicated the system was 98.89% accurate in real-world tests and up to 98.85% when evaluated via the pre-recorded dataset. This makes it an effective, low-cost, and convenient alternative to existing solutions since the proposed system has minimal hardware requirements without requiring any wearable or specific sensors or network connectivity.

We propose and experimentally demonstrate sequential quantum computing (SQC), a paradigm that utilizes multiple homogeneous or heterogeneous quantum processors in hybrid classical-quantum workflows. In this manner, we are able to overcome the limitations of each type of quantum computer by combining their complementary strengths. Current quantum devices, including analog quantum annealers and digital quantum processors, offer distinct advantages, yet face significant practical constraints when individually used. SQC addresses this by efficient inter-processor transfer of information through bias fields. Consequently, measurement outcomes from one quantum processor are encoded in the initial-state preparation of the subsequent quantum computer. We experimentally validate SQC by solving a combinatorial optimization problem with interactions up to three-body terms. A D-Wave quantum annealer utilizing 678 qubits approximately solves the problem, and an IBM's 156-qubit digital quantum processor subsequently refines the obtained solutions. This is possible via the digital introduction of non-stoquastic counterdiabatic terms unavailable to the analog quantum annealer. The experiment shows a substantial reduction in computational resources and improvement in the quality of the solution compared to the standalone operations of the individual quantum processors. These results highlight SQC as a powerful and versatile approach for addressing complex combinatorial optimization problems, with potential applications in quantum simulation of many-body systems, quantum chemistry, among others.

Approximations based on moment-closure (MA) are commonly used to obtain estimates of the mean molecule numbers and of the variance of fluctuations in the number of molecules of chemical systems. The advantage of this approach is that it can be far less computationally expensive than exact stochastic simulations of the chemical master equation. Here we numerically study the conditions under which the MA equations yield results reflecting the true stochastic dynamics of the system. We show that for bistable and oscillatory chemical systems with deterministic initial conditions, the solution of the MA equations can be interpreted as a valid approximation to the true moments of the CME, only when the steady-state mean molecule numbers obtained from the chemical master equation fall within a certain finite range. The same validity criterion for monostable systems implies that the steady-state mean molecule numbers obtained from the chemical master equation must be above a certain threshold. For mean molecule numbers outside of this range of validity, the MA equations lead to either qualitatively wrong oscillatory dynamics or to unphysical predictions such as negative variances in the molecule numbers or multiple steady-state moments of the stationary distribution as the initial conditions are varied. Our results clarify the range of validity of the MA approach and show that pitfalls in the interpretation of the results can only be overcome through the systematic comparison of the solutions of the MA equations of a certain order with those of higher orders.

Standing as one of the most significant barriers to reaching quantum advantage, state-preparation fidelities on noisy intermediate-scale quantum processors suffer from quantum-gate errors, which accumulate over time. A potential remedy is pulse-based state preparation. We numerically investigate the minimal evolution times (METs) attainable by optimizing (microwave and exchange) pulses on silicon hardware. We investigate two state preparation tasks. First, we consider the preparation of molecular ground states and find the METs for H_2, HeH^+, and LiH to be 2.4 ns, 4.4 ns, and 27.2 ns, respectively. Second, we consider transitions between arbitrary states and find the METs for transitions between arbitrary four-qubit states to be below 50 ns. For comparison, connecting arbitrary two-qubit states via one- and two-qubit gates on the same silicon processor requires approximately 200 ns. This comparison indicates that pulse-based state preparation is likely to utilize the coherence times of silicon hardware more efficiently than gate-based state preparation. Finally, we quantify the effect of silicon device parameters on the MET. We show that increasing the maximal exchange amplitude from 10 MHz to 1 GHz accelerates the METs, e.g., for H_2 from 84.3 ns to 2.4 ns. This demonstrates the importance of fast exchange. We also show that increasing the maximal amplitude of the microwave drive from 884 kHz to 56.6 MHz shortens state transitions, e.g., for two-qubit states from 1000 ns to 25 ns. Our results bound both the state-preparation times for general quantum algorithms and the execution times of variational quantum algorithms with silicon spin qubits.

Large language models often fail at simple counting tasks, even when the items to count are explicitly present in the prompt. We investigate whether this failure occurs because transformers do not represent counts internally, or because they cannot convert those representations into the correct output tokens. Across three model families, Pythia, Qwen3, and Mistral, ranging from 0.4B to 14B parameters, we find strong evidence for the second explanation. Linear probes recover the correct count from intermediate layers with near-perfect accuracy (R^2>0.99), showing that the information is present. However, the internal directions that encode counts are nearly orthogonal to the output-head rows for digit tokens (|cos|leq0.032). In other words, the model stores the count in a form that the digit logits do not naturally read out. We localize this failure with two interventions. Updating only the digit rows of the output head (36,864 parameters) substantially improves constrained next-token digit prediction (60.7 to 100.0% across four tasks), but it does not fix autoregressive generation. By contrast, a small LoRA intervention on attention Q/V weights (7.67M parameters) improves upstream routing and achieves 83.1% +/- 7.2% in true greedy autoregressive generation. Logit-lens measurements confirm the mechanism: the correct digit's vocabulary rank drops from 55,980 to 1, a 50,000x improvement. Additional norm, logit-lens, and cross-task analyses show that the bottleneck generalizes across character counting, addition, and list length, while remaining absent from broader multi-step reasoning benchmarks, including MMLU, GSM8K, and DROP. These results identify counting failure as a geometric readout bottleneck rather than a failure of internal representation: the model knows the count but the output pathway is geometrically misaligned with the tokens needed to express it.

Object counting has progressed from class-specific models, which count only known categories, to class-agnostic models that generalize to unseen categories. The next challenge is Referring Expression Counting (REC), where the goal is to count objects based on fine-grained attributes and contextual differences. Existing methods struggle with distinguishing visually similar objects that belong to the same category but correspond to different referring expressions. To address this, we propose C-REX, a novel contrastive learning framework, based on supervised contrastive learning, designed to enhance discriminative representation learning. Unlike prior works, C-REX operates entirely within the image space, avoiding the misalignment issues of image-text contrastive learning, thus providing a more stable contrastive signal. It also guarantees a significantly larger pool of negative samples, leading to improved robustness in the learned representations. Moreover, we showcase that our framework is versatile and generic enough to be applied to other similar tasks like class-agnostic counting. To support our approach, we analyze the key components of sota detection-based models and identify that detecting object centroids instead of bounding boxes is the key common factor behind their success in counting tasks. We use this insight to design a simple yet effective detection-based baseline to build upon. Our experiments show that C-REX achieves state-of-the-art results in REC, outperforming previous methods by more than 22\% in MAE and more than 10\% in RMSE, while also demonstrating strong performance in class-agnostic counting. Code is available at https://github.com/cvlab-stonybrook/c-rex.

Monodisperse, purely repulsive, hard spheres (MPRHS) are an important model system for mechanistically exploring phase behavior in atomic systems and colloids. Since the 1940s, phase transitions in these systems have been obtained via simulation, theory, and experiments. But there is a gap in this literature: despite decades of reports of phase transition from one pure state to another, no computational studies report spontaneous phase separation into coexisting domains of liquid and crystal regions. This gap owes its origin to the underlying mechanism of entropically-driven phase separation in MPRHS - the competition between short-range entropy and long-range entropy. Frenkel proposed that spontaneous phase separation in simulations of up to 1,000,000 particles would require more than 317,000,000 years to sample enough microstates to converge to phase separated macrostate. Some brute-force simulations do show brief spontaneous coexistence but a metastable crystal or fluid subsequently overtakes the system. To bypass these difficulties, many studies use seeding, gravity, or direct construction of liquid and solid phases to study interfacial energy and nucleation rates of MPRHS systems. WCA potentials have also been used to bypass metastability, where softness provides free volume, lowers osmotic pressure and the energy barrier. It is argued that the transition path taken in bypassing metastability is mechanistically the same as without triggers. But as acknowledged by Alder & Wainwright, explicit observation of spontaneous coexistence is central to computational prediction of first-order transition. Such observation would provide satisfying demonstration of Frenkel's entropy exchange mechanism. We explore literature revealing these interesting behaviors and conclude that computational demonstration of Frenkel's mechanism for MPRHS awaits large systems with careful hardness perturbations.

Modern neural recording techniques allow neuroscientists to obtain spiking activity of multiple neurons from different brain regions over long time periods, which requires new statistical methods to be developed for understanding structure of the large-scale data. In this paper, we develop a bi-clustering method to cluster the neural spiking activity spatially and temporally, according to their low-dimensional latent structures. The spatial (neuron) clusters are defined by the latent trajectories within each neural population, while the temporal (state) clusters are defined by (populationally) synchronous local linear dynamics shared with different periods. To flexibly extract the bi-clustering structure, we build the model non-parametrically, and develop an efficient Markov chain Monte Carlo (MCMC) algorithm to sample the posterior distributions of model parameters. Validating our proposed MCMC algorithm through simulations, we find the method can recover unknown parameters and true bi-clustering structures successfully. We then apply the proposed bi-clustering method to multi-regional neural recordings under different experiment settings, where we find that simultaneously considering latent trajectories and spatial-temporal clustering structures can provide us with a more accurate and interpretable result. Overall, the proposed method provides scientific insights for large-scale (counting) time series with elongated recording periods, and it can potentially have application beyond neuroscience.

Linear-attention language models keep their context in a recurrent state of fixed size, where an inference system stores one copy of this state for every sequence it decodes at the same time. Storing the state at lower precision therefore lets more sequences share an accelerator. Existing state quantizers round the state after every generated token and report that four bits lose accuracy unless the bit width is raised or the model is fine-tuned.\par We introduce PACE, a post-hoc four-bit state quantizer. PACE rounds the state only once every few generated tokens, as chunked kernels already do once per chunk during prefill, and keeps the tokens generated in between in a small buffer. Rounding less often reduces the error that accumulates in the state. Additionally, we find that the large entries of the gated-delta state gather in columns, because some channels of the update written at each token remain large across many tokens. PACE therefore shares each quantization scale within one column. It also keeps the heads that retain rounding error longest at eight bits. On four hybrid models from 4B to 35B parameters, PACE with mixed four- and eight-bit heads is competitive with eight-bit DAMP on the three larger models at about two thirds of its memory, PACE with four-bit heads throughout scores higher than Q-Mamba at equal memory, and rounding every few tokens preserves the decoding speedup of the buffer.

Multiple Instance Learning (MIL) has emerged as a dominant paradigm to extract discriminative feature representations within Whole Slide Images (WSIs) in computational pathology. Despite driving notable progress, existing MIL approaches suffer from limitations in facilitating comprehensive and efficient interactions among instances, as well as challenges related to time-consuming computations and overfitting. In this paper, we incorporate the Selective Scan Space State Sequential Model (Mamba) in Multiple Instance Learning (MIL) for long sequence modeling with linear complexity, termed as MambaMIL. By inheriting the capability of vanilla Mamba, MambaMIL demonstrates the ability to comprehensively understand and perceive long sequences of instances. Furthermore, we propose the Sequence Reordering Mamba (SR-Mamba) aware of the order and distribution of instances, which exploits the inherent valuable information embedded within the long sequences. With the SR-Mamba as the core component, MambaMIL can effectively capture more discriminative features and mitigate the challenges associated with overfitting and high computational overhead. Extensive experiments on two public challenging tasks across nine diverse datasets demonstrate that our proposed framework performs favorably against state-of-the-art MIL methods. The code is released at https://github.com/isyangshu/MambaMIL.

Semi-supervised crowd counting is an important yet challenging task. A popular approach is to iteratively generate pseudo-labels for unlabeled data and add them to the training set. The key is to use uncertainty to select reliable pseudo-labels. In this paper, we propose a novel method to calibrate model uncertainty for crowd counting. Our method takes a supervised uncertainty estimation strategy to train the model through a surrogate function. This ensures the uncertainty is well controlled throughout the training. We propose a matching-based patch-wise surrogate function to better approximate uncertainty for crowd counting tasks. The proposed method pays a sufficient amount of attention to details, while maintaining a proper granularity. Altogether our method is able to generate reliable uncertainty estimation, high quality pseudolabels, and achieve state-of-the-art performance in semisupervised crowd counting.

Satisfiability Modulo Counting (SMC) is a recently proposed general language to reason about problems integrating statistical and symbolic Artificial Intelligence. An SMC problem is an extended SAT problem in which the truth values of a few Boolean variables are determined by probabilistic inference. Approximate solvers may return solutions that violate constraints. Directly integrating available SAT solvers and probabilistic inference solvers gives exact solutions but results in slow performance because of many back-and-forth invocations of both solvers. We propose KOCO-SMC, an integrated exact SMC solver that efficiently tracks lower and upper bounds in the probabilistic inference process. It enhances computational efficiency by enabling early estimation of probabilistic inference using only partial variable assignments, whereas existing methods require full variable assignments. In the experiment, we compare KOCO-SMC with currently available approximate and exact SMC solvers on large-scale datasets and real-world applications. The proposed KOCO-SMC finds exact solutions with much less time.

We construct Feynman rules for Lindblad master equations in the operator language of quantum optics: a fixed algebra of elementary operator moves and closed-form propagators for perturbation theory about an exactly solvable, in most cases Gaussian, generator. The expansion separates into a kinematic part (the shift algebra on the Wick-ordered eigenoperators O_{mn}=:(c^dagger)^m c^n:, from which the vertex table for a specified interaction is assembled) and a dynamical part that enters only through the resolvent of the unperturbed generator, diagonal and additive for any stable, diagonalizable Gaussian L_0, including thermal and squeezed reservoirs and correlated decay, and equally available for a two-level emitter, driven or undriven. In the driven Kerr cavity the loop expansion is the semiclassical expansion and the series is asymptotic. In a strongly driven two-level atom, dressed lines replace a series of finite radius by one accurate deep into saturation, one line per Mollow component. For Kerr rings and chains the cost is polynomial in the number of sites at fixed perturbative order. On a three-site ring the diagrams recover the non-Gaussian part of the three-photon correlation that the Gaussian cumulant closure lacks; carried to tenth order they give the smallest g^{(3)} error of the methods compared for Uleq0.25κ at a cost below that of a fourth-order closure, and third- and fourth-order closures are more accurate at moderate coupling. The same rules, extended to the counting-field-tilted generator, give the photon-counting cumulants of a disordered eight-site chain beyond direct diagonalization; quantum-jump trajectories at three couplings agree with them to within 1.6 standard errors, within one at the strongest coupling, where they place the third cumulant six standard errors above the Gaussian value.

In recent years, diffusion-based models have demonstrated exceptional performance in searching for simultaneously stable, unique, and novel (S.U.N.) crystalline materials. However, most of these models don't have the ability to change the number of atoms in the crystal during the generation process, which limits the variability of model sampling trajectories. In this paper, we demonstrate the severity of this restriction and introduce a simple yet powerful technique, mirage infusion, which enables diffusion models to change the state of the atoms that make up the crystal from existent to non-existent (mirage) and vice versa. We show that this technique improves model quality by up to times2.5 compared to the same model without this modification. The resulting model, Mirage Atom Diffusion (MiAD), is an equivariant joint diffusion model for de novo crystal generation that is capable of altering the number of atoms during the generation process. MiAD achieves an 8.2% S.U.N. rate on the MP-20 dataset, which substantially exceeds existing state-of-the-art approaches. The source code can be found at https://github.com/andrey-okhotin/miad.git{github.com/andrey-okhotin/miad}.

Large language models perform strongly on benchmarks in mathematical reasoning, coding and document analysis, suggesting a broad ability to follow instructions. However, it remains unclear whether such success reflects general logical competence, repeated application of learned procedures, or pattern matching that mimics rule execution. We investigate this question by introducing Stable Counting Capacity, an assay in which models count repeated symbols until failure. The assay removes knowledge dependencies, semantics and ambiguity from evaluation, avoids lexical and tokenization confounds, and provides a direct measure of procedural reliability beyond standard knowledge-based benchmarks. Here we show, across more than 100 model variants, that stable counting capacity remains far below advertised context limits. Model behavior is consistent neither with open-ended logic nor with stable application of a learned rule, but instead with use of a finite set of count-like internal states, analogous to counting on fingers. Once this resource is exhausted, the appearance of rule following disappears and exact execution collapses into guessing, even with additional test-time compute. These findings show that fluent performance in current language models does not guarantee general, reliable rule following.

The CLIP (Contrastive Language-Image Pretraining) model has exhibited outstanding performance in recognition problems, such as zero-shot image classification and object detection. However, its ability to count remains understudied due to the inherent challenges of transforming counting--a regression task--into a recognition task. In this paper, we investigate CLIP's potential in counting, focusing specifically on estimating crowd sizes. Existing classification-based crowd-counting methods have encountered issues, including inappropriate discretization strategies, which impede the application of CLIP and result in suboptimal performance. To address these challenges, we propose the Enhanced Blockwise Classification (EBC) framework. In contrast to previous methods, EBC relies on integer-valued bins that facilitate the learning of robust decision boundaries. Within our model-agnostic EBC framework, we introduce CLIP-EBC, the first fully CLIP-based crowd-counting model capable of generating density maps. Comprehensive evaluations across diverse crowd-counting datasets demonstrate the state-of-the-art performance of our methods. Particularly, EBC can improve existing models by up to 76.9%. Moreover, our CLIP-EBC model surpasses current crowd-counting methods, achieving mean absolute errors of 55.0 and 6.3 on ShanghaiTech part A and part B datasets, respectively. The code will be made publicly available.

Object counting typically uses 2D point annotations. The complexity of object shapes and the subjectivity of annotators may lead to annotation inconsistency, potentially confusing counting model training. Some sophisticated noise-resistance counting methods have been proposed to alleviate this issue. Differently, we aim to directly refine the initial point annotations before training counting models. For that, we propose the Shifted Autoencoders (SAE), which enhances annotation consistency. Specifically, SAE applies random shifts to initial point annotations and employs a UNet to restore them to their original positions. Similar to MAE reconstruction, the trained SAE captures general position knowledge and ignores specific manual offset noise. This allows to restore the initial point annotations to more general and thus consistent positions. Extensive experiments show that using such refined consistent annotations to train some advanced (including noise-resistance) object counting models steadily/significantly boosts their performances. Remarkably, the proposed SAE helps to set new records on nine datasets. We will make codes and refined point annotations available.

Most artificial life simulators either operate on abstract substrates disconnected from physical reality, or simulate physically grounded worlds that do not scale to the population sizes required for open-ended evolution. We present Microcosmos, a simulation engine in which artificial lifeforms are modeled as elastic filament chains inhabiting a two-dimensional viscous fluid world, designed from the ground up for modern GPU hardware and end-to-end differentiable simulation. We validate the engine through four experiments. Hand-designed locomotion strategies confirm that the fluid coupling respects known physical constraints. Gradient-based optimization of filament folding demonstrates both the full differentiability of the simulator and the expressivity of the filament encodings. Neuroevolution and quality-diversity search produce a wide range of swimming and chemotaxis behaviors automatically. Linear scaling with particle count confirms the engine supports large-scale simulation. Microcosmos is released as an open platform with the long-term goal of supporting large-scale open-ended evolutionary simulations, designed to be physically plausible and computationally scalable.

Scaling inference-time compute has emerged as an important driver of LLM performance, making inference efficiency a central focus of model design alongside model quality. While the current Transformer-based models deliver strong model quality, their quadratic compute and linear memory make inference expensive. This has spurred the development of sub-quadratic models with reduced linear compute and constant memory requirements. However, many recent linear models trade off model quality and capability for algorithmic efficiency, failing on tasks such as state tracking. Moreover, their theoretically linear inference remains hardware-inefficient in practice. Guided by an inference-first perspective, we introduce three core methodological improvements inspired by the state space model (SSM) viewpoint of linear models. We combine: (1) a more expressive recurrence derived from SSM discretization, (2) a complex-valued state update rule that enables richer state tracking, and (3) a multi-input, multi-output (MIMO) formulation for better model performance without increasing decode latency. Together with architectural refinements, our Mamba-3 model achieves significant gains across retrieval, state-tracking, and downstream language modeling tasks. At the 1.5B scale, Mamba-3 improves average downstream accuracy by 0.6 percentage points compared to the next best model (Gated DeltaNet), with Mamba-3's MIMO variant further improving accuracy by another 1.2 points for a total 1.8 point gain. Across state-size experiments, Mamba-3 achieves comparable perplexity to Mamba-2 despite using half of its predecessor's state size. Our evaluations demonstrate Mamba-3's ability to advance the performance-efficiency Pareto frontier.

Most counting questions in visual question answering (VQA) datasets are simple and require no more than object detection. Here, we study algorithms for complex counting questions that involve relationships between objects, attribute identification, reasoning, and more. To do this, we created TallyQA, the world's largest dataset for open-ended counting. We propose a new algorithm for counting that uses relation networks with region proposals. Our method lets relation networks be efficiently used with high-resolution imagery. It yields state-of-the-art results compared to baseline and recent systems on both TallyQA and the HowMany-QA benchmark.

We show how to extract from a sufficiently long time series of stationary fluctuations of chemical reactions an estimate of the entropy production. This method, which is based on recent work on fluctuation theorems, is direct, non-invasive, does not require any knowledge about the underlying dynamics, and is applicable even when only partial information is available. We apply it to simple stochastic models of chemical reactions involving a finite number of states, and for this case, we study how the estimate of dissipation is affected by the degree of coarse-graining present in the input data.

Counting repetitive actions are widely seen in human activities such as physical exercise. Existing methods focus on performing repetitive action counting in short videos, which is tough for dealing with longer videos in more realistic scenarios. In the data-driven era, the degradation of such generalization capability is mainly attributed to the lack of long video datasets. To complement this margin, we introduce a new large-scale repetitive action counting dataset covering a wide variety of video lengths, along with more realistic situations where action interruption or action inconsistencies occur in the video. Besides, we also provide a fine-grained annotation of the action cycles instead of just counting annotation along with a numerical value. Such a dataset contains 1,451 videos with about 20,000 annotations, which is more challenging. For repetitive action counting towards more realistic scenarios, we further propose encoding multi-scale temporal correlation with transformers that can take into account both performance and efficiency. Furthermore, with the help of fine-grained annotation of action cycles, we propose a density map regression-based method to predict the action period, which yields better performance with sufficient interpretability. Our proposed method outperforms state-of-the-art methods on all datasets and also achieves better performance on the unseen dataset without fine-tuning. The dataset and code are available.

We study the right to be forgotten (GDPR Art. 17) for large language models and frame unlearning as a reproducible systems problem. Our approach treats training as a deterministic program and logs a minimal per-microbatch record (ordered ID hash, RNG seed, learning-rate value, optimizer-step counter, and accumulation boundary). Under a pinned stack and deterministic kernels, replaying the training tail while filtering only the forget closure yields the same parameters as training on the retain set (bit-identical in the training dtype) when preconditions hold. To meet latency and availability constraints, we add complementary paths: (i) exact reverts of recent steps via micro-checkpoints or dense per-step deltas, (ii) cohort-scoped adapter deletion when the base is frozen, and (iii) a curvature-guided anti-update followed by a short retain-tune, audit-gated with escalation to exact replay. We report storage/latency budgets and a toy artifact validating mechanics; in a controlled run that satisfies the preconditions we demonstrate byte-identical equality of model and optimizer states.

Large vision-language models (VLMs), such as CLIP, learn rich joint image-text representations, facilitating advances in numerous downstream tasks, including zero-shot classification and text-to-image generation. Nevertheless, existing VLMs exhibit a prominent well-documented limitation - they fail to encapsulate compositional concepts such as counting. We introduce a simple yet effective method to improve the quantitative understanding of VLMs, while maintaining their overall performance on common benchmarks. Specifically, we propose a new counting-contrastive loss used to finetune a pre-trained VLM in tandem with its original objective. Our counting loss is deployed over automatically-created counterfactual examples, each consisting of an image and a caption containing an incorrect object count. For example, an image depicting three dogs is paired with the caption "Six dogs playing in the yard". Our loss encourages discrimination between the correct caption and its counterfactual variant which serves as a hard negative example. To the best of our knowledge, this work is the first to extend CLIP's capabilities to object counting. Furthermore, we introduce "CountBench" - a new image-text counting benchmark for evaluating a model's understanding of object counting. We demonstrate a significant improvement over state-of-the-art baseline models on this task. Finally, we leverage our count-aware CLIP model for image retrieval and text-conditioned image generation, demonstrating that our model can produce specific counts of objects more reliably than existing ones.

We consider low-shot counting of arbitrary semantic categories in the image using only few annotated exemplars (few-shot) or no exemplars (no-shot). The standard few-shot pipeline follows extraction of appearance queries from exemplars and matching them with image features to infer the object counts. Existing methods extract queries by feature pooling, but neglect the shape information (e.g., size and aspect), which leads to a reduced object localization accuracy and count estimates. We propose a Low-shot Object Counting network with iterative prototype Adaptation (LOCA). Our main contribution is the new object prototype extraction module, which iteratively fuses the exemplar shape and appearance queries with image features. The module is easily adapted to zero-shot scenario, enabling LOCA to cover the entire spectrum of low-shot counting problems. LOCA outperforms all recent state-of-the-art methods on FSC147 benchmark by 20-30% in RMSE on one-shot and few-shot and achieves state-of-the-art on zero-shot scenarios, while demonstrating better generalization capabilities.

The Sherrington-Kirkpatrick spin-glass model used the replica symmetry method to find the phase transition of the system. In 1979-1980, Parisi proposed a solution based on replica symmetry breaking (RSB), which allowed him to identify the underlying phases of complex systems such as spin-glasses. Regardless of the method used for detection, the intrinsic phase of a system exists whether or not replicas are considered. We introduce a single replica method of spin-glass phase detection using the field's variation experienced by each spin in a system configuration. This method focuses on a single replica with quenched random couplings. Each spin inevitably observes a different field from the others. Our results show that the mean and variance of fields named "Spontaneous Configurational Field" experienced by spins are suitable indicators to explore different ferromagnetic, paramagnetic, and mixed phases. To classify different phases of the system with defined indicators we have developed an algorithm based on machine learning to analyze the desired samples.

We present a deep learning approach for quantifying and localizing ex-situ porosity within Laser Powder Bed Fusion fabricated samples utilizing in-situ thermal image monitoring data. Our goal is to build the real time porosity map of parts based on thermal images acquired during the build. The quantification task builds upon the established Convolutional Neural Network model architecture to predict pore count and the localization task leverages the spatial and temporal attention mechanisms of the novel Video Vision Transformer model to indicate areas of expected porosity. Our model for porosity quantification achieved a R^2 score of 0.57 and our model for porosity localization produced an average IoU score of 0.32 and a maximum of 1.0. This work is setting the foundations of part porosity "Digital Twins" based on additive manufacturing monitoring data and can be applied downstream to reduce time-intensive post-inspection and testing activities during part qualification and certification. In addition, we seek to accelerate the acquisition of crucial insights normally only available through ex-situ part evaluation by means of machine learning analysis of in-situ process monitoring data.

High-precision modeling of systems is one of the main areas of industrial data analysis. Models of systems, their digital twins, are used to predict their behavior under various conditions. We have developed several models of a storage system using machine learning-based generative models. The system consists of several components: hard disk drive (HDD) and solid-state drive (SSD) storage pools with different RAID schemes and cache. Each storage component is represented by a probabilistic model that describes the probability distribution of the component performance in terms of IOPS and latency, depending on their configuration and external data load parameters. The results of the experiments demonstrate the errors of 4-10 % for IOPS and 3-16 % for latency predictions depending on the components and models of the system. The predictions show up to 0.99 Pearson correlation with Little's law, which can be used for unsupervised reliability checks of the models. In addition, we present novel data sets that can be used for benchmarking regression algorithms, conditional generative models, and uncertainty estimation methods in machine learning.

QDNA-ID is a trust-chain framework that links physical quantum behavior to digitally verified records. The system first executes standard quantum circuits with random shot patterns across different devices to generate entropy profiles and measurement data that reveal device-specific behavior. A Bell or CHSH test is then used to confirm that correlations originate from genuine non classical processes rather than classical simulation. The verified outcomes are converted into statistical fingerprints using entropy, divergence, and bias features to characterize each device. These features and metadata for device, session, and random seed parameters are digitally signed and time stamped to ensure integrity and traceability. Authenticated artifacts are stored in a hierarchical index for reproducible retrieval and long term auditing. A visualization and analytics interface monitors drift, policy enforcement, and device behavior logs. A machine learning engine tracks entropy drift, detects anomalies, and classifies devices based on evolving patterns. An external verification API supports independent recomputation of hashes, signatures, and CHSH evidence. QDNA-ID operates as a continuous feedback loop that maintains a persistent chain of trust for quantum computing environments.

Predicting properties of complex, large-scale quantum systems is essential for developing quantum technologies. We present an efficient method for constructing an approximate classical description of a quantum state using very few measurements of the state. This description, called a classical shadow, can be used to predict many different properties: order log M measurements suffice to accurately predict M different functions of the state with high success probability. The number of measurements is independent of the system size, and saturates information-theoretic lower bounds. Moreover, target properties to predict can be selected after the measurements are completed. We support our theoretical findings with extensive numerical experiments. We apply classical shadows to predict quantum fidelities, entanglement entropies, two-point correlation functions, expectation values of local observables, and the energy variance of many-body local Hamiltonians. The numerical results highlight the advantages of classical shadows relative to previously known methods.

Camera traps have become an essential tool for wildlife monitoring, motivating the development of computer vision methods for the automated extraction of information from these data. While most prior work has focused on species identification, many ecological applications also require estimating the number of unique individuals appearing across short image sequences. This task is particularly challenging because camera traps typically acquire bursts of images at approximately one frame per second, creating large temporal discontinuities that may make conventional multi-object tracking methods unreliable, and because manually collecting individual count annotations is prohibitively expensive. In this work, we describe the winning solution to the iWildCam 2021 Challenge, which introduced a benchmark for counting animals at the sequence level under realistic annotation constraints where count annotations are unavailable for training. Our approach, MaxBoxCount, combines a strong species classification pipeline with a simple yet effective counting heuristic based on MegaDetector detections to estimate the number of unique individuals without requiring count annotations. Code is available at https://github.com/alcunha/iwildcam2021ufam.

Large language models (LLMs) have shown remarkable progress in coding and math problem-solving, but evaluation on advanced research-level problems in hard sciences remains scarce. To fill this gap, we present CMT-Benchmark, a dataset of 50 problems covering condensed matter theory (CMT) at the level of an expert researcher. Topics span analytical and computational approaches in quantum many-body, and classical statistical mechanics. The dataset was designed and verified by a panel of expert researchers from around the world. We built the dataset through a collaborative environment that challenges the panel to write and refine problems they would want a research assistant to solve, including Hartree-Fock, exact diagonalization, quantum/variational Monte Carlo, density matrix renormalization group (DMRG), quantum/classical statistical mechanics, and model building. We evaluate LLMs by programmatically checking solutions against expert-supplied ground truth. We developed machine-grading, including symbolic handling of non-commuting operators via normal ordering. They generalize across tasks too. Our evaluations show that frontier models struggle with all of the problems in the dataset, highlighting a gap in the physical reasoning skills of current LLMs. Notably, experts identified strategies for creating increasingly difficult problems by interacting with the LLMs and exploiting common failure modes. The best model, GPT5, solves 30\% of the problems; average across 17 models (GPT, Gemini, Claude, DeepSeek, Llama) is 11.4pm2.1\%. Moreover, 18 problems are solved by none of the 17 models, and 26 by at most one. These unsolved problems span Quantum Monte Carlo, Variational Monte Carlo, and DMRG. Answers sometimes violate fundamental symmetries or have unphysical scaling dimensions. We believe this benchmark will guide development toward capable AI research assistants and tutors.

We present an experimental implementation of the multiplayer Quantum Volunteer's Dilemma on noisy intermediate-scale quantum (NISQ) hardware, executed on the ibm_kingston backend via Qiskit Runtime. The game is evaluated for N = 2 to 9 players under four transpiler optimization levels, with 20 independent repetitions per configuration and 2048 shots per circuit, including post-processing readout error correction via mthree. Target-state fidelity decays with system size but remains above 70% (corrected) through N = 9. With readout correction, the global average payoff reproduces the quantum theoretical benchmark exactly for N <= 6 and exceeds the classical Nash equilibrium across the full tested range. Optimization level 2 is selected as the reference configuration after gate count analysis reveals that levels 2 and 3 produce identical transpiled circuits, with level 2 achieving superior fidelity stability. A Hamming distance analysis of raw measurement counts shows that single-qubit errors dominate at small N, with multi-qubit contributions growing beyond N = 6. A calibration-based digital twin captures global payoff trends but exhibits a linear fidelity decay profile that diverges from the hardware behavior at large N, exposing the limits of first-order independent per-qubit noise models. These results demonstrate that aggregate quantum advantage in multiplayer games is robust to NISQ noise conditions across the full tested range, while the practical observability of state-level advantage is constrained to N <= 8 under post-processed readout correction.

The overwhelming majority of molecules remains unexplored. This is mostly due to the sheer number of them, which prohibits any enumeration of chemical space, the set of all such molecules. In practice, only subsets of chemical space are considered, but those subsets exhibit substantial bias, prohibiting data-driven characterization of chemical space itself. In this work, we provide a method produce unbiased representative random samples of chemical space without enumeration of constituent molecules and to estimate the number of molecules in any custom chemical space. The approach is applicable to molecules which can be represented as graph and runs efficiently even for molecules of 30 atoms. We use it to estimate the representativeness of current databases with respect to their underlying chemical space and to establish a necessary criterion for a lower bound of database sizes to be representative of an underlying chemical space.

Recently, Hastings & Haah introduced a quantum memory defined on the honeycomb lattice. Remarkably, this honeycomb code assembles weight-six parity checks using only two-local measurements. The sparse connectivity and two-local measurements are desirable features for certain hardware, while the weight-six parity checks enable robust performance in the circuit model. In this work, we quantify the robustness of logical qubits preserved by the honeycomb code using a correlated minimum-weight perfect-matching decoder. Using Monte Carlo sampling, we estimate the honeycomb code's threshold in different error models, and project how efficiently it can reach the "teraquop regime" where trillions of quantum logical operations can be executed reliably. We perform the same estimates for the rotated surface code, and find a threshold of 0.2%-0.3% for the honeycomb code compared to a threshold of 0.5%-0.7% for the surface code in a controlled-not circuit model. In a circuit model with native two-body measurements, the honeycomb code achieves a threshold of 1.5% < p <2.0%, where p is the collective error rate of the two-body measurement gate - including both measurement and correlated data depolarization error processes. With such gates at a physical error rate of 10^{-3}, we project that the honeycomb code can reach the teraquop regime with only 600 physical qubits.

Finding the ground state of a quantum many-body system is a fundamental problem in quantum physics. In this work, we give a classical machine learning (ML) algorithm for predicting ground state properties with an inductive bias encoding geometric locality. The proposed ML model can efficiently predict ground state properties of an n-qubit gapped local Hamiltonian after learning from only O(log(n)) data about other Hamiltonians in the same quantum phase of matter. This improves substantially upon previous results that require O(n^c) data for a large constant c. Furthermore, the training and prediction time of the proposed ML model scale as O(n log n) in the number of qubits n. Numerical experiments on physical systems with up to 45 qubits confirm the favorable scaling in predicting ground state properties using a small training dataset.

Text-to-image (T2I) diffusion models have achieved strong performance in semantic alignment, yet they still struggle with generating the correct number of objects specified in prompts. Existing approaches typically incorporate auxiliary counting networks as external critics to enhance numeracy. However, since these critics must provide gradient guidance during generation, they are restricted to regression-based models that are inherently differentiable, thus excluding detector-based models with superior counting ability, whose count-via-enumeration nature is non-differentiable. To overcome this limitation, we propose Detector-to-Differentiable (D2D), a novel framework that transforms non-differentiable detection models into differentiable critics, thereby leveraging their superior counting ability to guide numeracy generation. Specifically, we design custom activation functions to convert detector logits into soft binary indicators, which are then used to optimize the noise prior at inference time with pre-trained T2I models. Our extensive experiments on SDXL-Turbo, SD-Turbo, and Pixart-DMD across four benchmarks of varying complexity (low-density, high-density, and multi-object scenarios) demonstrate consistent and substantial improvements in object counting accuracy (e.g., boosting up to 13.7% on D2D-Small, a 400-prompt, low-density benchmark), with minimal degradation in overall image quality and computational overhead.

We present a deterministic framework for preparing an arbitrary three-qubit pure state. To leverage entanglement structure in the state-preparation task, we classify three-qubit pure states into five types with respect to a 1|2 bipartition. Given a target state specified by its amplitudes, we provide concrete criteria and concurrence-based tests that determine its type. For each type, we derive an explicit circuit template composed of elementary single-qubit rotations and CNOT gates, with gate parameters determined systematically from the Schmidt decomposition. The full construction is described step by step from the target amplitudes, with no procedural ambiguity. As an application, we further group frequently encountered three-qubit pure states in quantum information into four classes and provide an explicit circuit for each class. Compared with prior approaches, our circuits are designed for practical use: they admit a direct algorithmic instantiation, use only CNOT gates between adjacent qubits, and for certain classes achieve smaller gate counts and circuit depth.

State-space models (SSMs) maintain a fixed-size recurrent state, but reading and writing it at every decoding step can bottleneck hybrid models. This eager state management causes large state I/O with low arithmetic intensity, leaves speculative decoding no cheap rollback, and feeds state quantization error into subsequent recurrent updates. We introduce ReplaySSM, which unrolls the recurrence to represent the state as a checkpoint and a buffer of recent SSM inputs. This separates output computation from checkpoint updates. By updating the checkpoint periodically, ReplaySSM avoids state writes on most steps and roughly halves the dominant state memory traffic. Keeping recent inputs also makes speculative rollback a buffer-pointer operation and enables output-only verification without materializing intermediate states. The same separation allows a low-precision checkpoint to serve output computation on most steps while a higher-precision checkpoint serves recurrent updates, so rounding error in the low-precision copy never enters later updates. We implement ReplaySSM in vLLM for Mamba-2 and Gated DeltaNet. At serving batch size 256, it accelerates standard decoding by 1.20--1.47times over a tuned vLLM baseline across four hybrid models, and delivers about 1.8times the throughput of vLLM's speculative decoding on the two 120B-class models. Separate state precisions also reduce output KL divergence and downstream accuracy losses compared with a shared low-precision checkpoint.

State Space Models (SSMs) are emerging as a compelling alternative to Transformers because of their consistent memory usage and high performance. Despite this, scaling up SSMs on cloud services or limited-resource devices is challenging due to their storage requirements and computational power. To overcome this, quantizing SSMs with low bit-width data formats can reduce model size and benefit from hardware acceleration. As SSMs are prone to quantization-induced errors, recent efforts have focused on optimizing a particular model or bit-width for efficiency without sacrificing performance. However, distinct bit-width configurations are essential for different scenarios, like W4A8 for boosting large-batch decoding speed, and W4A16 for enhancing generation speed in short prompt applications for a single user. To this end, we present Quamba2, compatible with W8A8, W4A8, and W4A16 for both Mamba1 and Mamba2 backbones, addressing the growing demand for SSM deployment on various platforms. Based on the channel order preserving and activation persistence of SSMs, we propose an offline approach to quantize inputs of a linear recurrence in 8-bit by sorting and clustering for input x, combined with a per-state-group quantization for input-dependent parameters B and C. To ensure compute-invariance in the SSM output, we rearrange weights offline according to the clustering sequence. The experiments show that Quamba2-8B outperforms several state-of-the-art SSM quantization methods and delivers 1.3times and 3times speed-ups in the pre-filling and generation stages, respectively, while offering 4times memory reduction with only a 1.6% average accuracy drop. The evaluation on MMLU shows the generalizability and robustness of our framework. The code and quantized models will be released at: https://github.com/enyac-group/Quamba.

Genuine quantum-mechanical effects are readily observable in modern optomechanical systems comprising bosonic ("classical") optical resonators. Here we describe unique features and advantages of optical two-level systems, or qubits, for optomechanics. The qubit state can be coherently controlled using both phonons and resonant or detuned photons. We experimentally demonstrate this using charge-controlled InAs quantum dots (QDs) in surface-acoustic-wave resonators. Time-correlated single-photon counting measurements reveal the control of QD population dynamics using engineered optical pulses and mechanical motion. As a first example, at moderate acoustic drive strengths, we demonstrate the potential of this technique to maximize fidelity in quantum microwave-to-optical transduction. Specifically, we tailor the scheme so that mechanically assisted photon scattering is enhanced over the direct detuned photon scattering from the QD. Spectral analysis reveals distinct scattering channels related to Rayleigh scattering and luminescence in our pulsed excitation measurements which lead to time-dependent scattering spectra. Quantum-mechanical calculations show good agreement with our experimental results, together providing a comprehensive description of excitation, scattering and emission in a coupled QD-phonon optomechanical system.

Before acting upon an unobservable physical system, an autonomous agent must determine which latent distinctions govern downstream tasks, how many active interventions are necessary to certify them, and when to abstain to prevent catastrophic errors. Classical observability treats state reconstruction as an unconditioned binary predicate, failing when passive observations cannot break latent degeneracies without perturbation, full microscopic inversion is prohibitively costly, and distinguishing task-irrelevant degrees of freedom wastes interaction budgets. We formalize task-conditioned active observability complexity: the minimum worst-case expected interaction cost required to identify task-relevant states under certified error and safe abstention guarantees. We prove that task-predictive equivalence induces the unique minimal sufficient quotient H/!sim_τ, leaving active observability complexity strictly invariant while eliminating superfluous distinctions. In deterministic regimes, this complexity is characterized by an optimal adaptive distinguishing tree and Bellman recursion; in noisy regimes, it obeys a stopped-transcript relative-entropy lower bound and adaptive martingale certificates that compose without independence assumptions. We instantiate a prospective certified observer with staged recovery: a nominal verifier defers candidate compilation, triggering active probing only upon evidence, while a history-measurable score shell prunes hypotheses without sacrificing risk bounds. Stress audits across high-dimensional physical systems and thousands of operational trials demonstrate certified state recovery with zero false acceptances and substantial reductions in sensor reads and model steps.

Generative models have advanced significantly in sampling material systems with continuous variables, such as atomistic structures. However, their application to discrete variables, like atom types or spin states, remains underexplored. In this work, we introduce a Boltzmann generator built on discrete flow matching, specifically tailored for systems with discrete phase-space coordinates (e.g., the Ising model or crystalline compounds). This approach enables a single model to sample free energy surfaces over a wide temperature range with minimal training overhead. In addition, the model generation is scalable to larger lattice sizes than those in the training set. We demonstrate the effectiveness of our approach on the 2D Ising model, showing efficient and reliable free energy sampling. This framework provides a scalable and computationally efficient solution for discrete coordinate systems and can be extended to sample the alchemical degrees of freedom in crystalline compounds.

The dynamic imbalance of the fore-background is a major challenge in video object counting, which is usually caused by the sparsity of target objects. This remains understudied in existing works and often leads to severe under-/over-prediction errors. To tackle this issue in video object counting, we propose a density-embedded Efficient Masked Autoencoder Counting (E-MAC) framework in this paper. To empower the model's representation ability on density regression, we develop a new Density-Embedded Masked mOdeling (DEMO) method, which first takes the density map as an auxiliary modality to perform multimodal self-representation learning for image and density map. Although DEMO contributes to effective cross-modal regression guidance, it also brings in redundant background information, making it difficult to focus on the foreground regions. To handle this dilemma, we propose an efficient spatial adaptive masking derived from density maps to boost efficiency. Meanwhile, we employ an optical flow-based temporal collaborative fusion strategy to effectively capture the dynamic variations across frames, aligning features to derive multi-frame density residuals. The counting accuracy of the current frame is boosted by harnessing the information from adjacent frames. In addition, considering that most existing datasets are limited to human-centric scenarios, we first propose a large video bird counting dataset, DroneBird, in natural scenarios for migratory bird protection. Extensive experiments on three crowd datasets and our DroneBird validate our superiority against the counterparts. The code and dataset are available.

State-space model releases are typically coupled to fused CUDA and Triton kernels, inheriting a hard dependency on NVIDIA hardware. We show that Mamba-2's state space duality algorithm -- diagonal state structure, chunkable recurrence, and einsum-dominated compute with static control flow -- maps cleanly onto what XLA's fusion and tiling passes actually optimise, making custom kernels optional rather than required. We implement the full inference path (prefill, cached autoregressive decoding) as shaped standard primitives under XLA, without hand-written kernels, and realise the architecture's theoretical O(1) state management as a compiled on-device cache requiring no host synchronisation during generation. The implementation runs unmodified on CPU, NVIDIA GPU, and Google Cloud TPU from a single JAX source. On TPU v6e across five model scales (130M--2.7B parameters), XLA-generated code reaches approximately 140 TFLOPS on single-stream prefill (15% MFU) and up to 64% bandwidth utilisation on decode. Greedy decoding matches the PyTorch/CUDA reference token-for-token across 64 steps, with hidden-state agreement within float32 rounding tolerance. The pattern transfers to any SSM recurrence satisfying the same structural conditions, on any platform with a mature XLA backend. The implementation is publicly available at https://github.com/CosmoNaught/mamba2-jax and merged into the Bonsai JAX model library.

Induced pluripotent stem cell (iPSC) culture increasingly relies on segmentation foundation models, yet deployment on laboratory CPUs and edge hardware requires compression schemes that are both efficient and auditable. We present a deployment-oriented evaluation of compressed Cellpose-SAM using a pre-specified retention criterion: the 95% cluster-bootstrap interval of mean change from FP32 must remain above a fixed -0.02 margin for every imaging modality. On a stratified 176-field panel spanning BBBC038 nuclei, BBBC039 U2OS fluorescence, and NIST iPSC images across density regimes, weight-only W8A16 preserves instance F1 across all modalities. A sensitivity-guided mixed W4/W8 scheme, using four INT8 exceptions, achieves a 6.76x reduction in weight storage with no observed catastrophic failures (0/176 fields), matching W8A16 at this sample size. In contrast, ternary weight-only quantization achieves 12.08x compression but fails catastrophically on 169/176 fields. These results demonstrate that compression should be evaluated by modality-stratified downstream retention rather than single-number accuracy, and establish a reproducible protocol for auditing compressed foundation models in regulated stem-cell imaging.

Foundation models are increasingly being pursued in particle and nuclear physics, but existing approaches remain strongly tied to individual experiments through detector-specific architectures or pre-training objectives, limiting their reuse across sensing modalities. We show that a point cloud self-distillation framework yields a substantially more general sensor-level pre-training recipe. We show that the same refined architecture and objective can be independently pre-trained with minimal changes on three qualitatively different detector modalities: liquid argon time projection chamber (LArTPC), collider TPC, and water Cherenkov. Using 1,000 labeled images for downstream task adaptation, Panda V2 matches or exceeds specialized foundation-model baselines trained with orders of magnitude more supervision, matching state-of-the-art particle-clustering performance with 70x fewer labeled events on sPHENIX while substantially improving particle identification, and on LArTPC data matching Panda (arXiv:2512.01324) particle reconstruction with up to 1,000x fewer labels. Beyond reconstruction, simple linear probes reveal physically meaningful latent structure associated with particle causality and track curvature.